Rainfall Intensity Calculator

Rainfall Intensity Calculator

#5 · Weather and Climate AI Skill PRO

Enter Calculation

Formula

Intensity=Rainfall Depth (mm)Duration (hours)\text{Intensity} = \frac{\text{Rainfall Depth (mm)}}{\text{Duration (hours)}}

Example

Intensity=100.5=20\text{Intensity} = \frac{10}{0.5} = 20
Usage stats

Advertisement

Results

Rainfall Intensity
20
mm/hr
Category Heavy rain
Duration 30 minutes

Report an error on this page

What Is Rainfall Intensity?

Rainfall intensity is the rate at which rain falls over a given period, usually expressed in millimetres per hour (mm/hr). It is a fundamental value in hydrology, drainage design, agriculture, and flood-risk assessment. Knowing intensity—rather than just total rainfall—tells you how quickly water accumulates, which determines whether soil, gutters, or storm drains can cope.

Rain falling into a measured container with a depth ruler and a clock
Rainfall intensity relates the depth of collected rain to the time over which it falls.

How to Use This Calculator

Enter the total rainfall depth in millimetres and the duration in hours over which it was measured. The calculator divides depth by duration to give the average intensity in mm/hr, shows the equivalent duration in minutes, and classifies the result into a familiar meteorological category.

The Formula Explained

The relationship is simply:

$$i = \frac{P}{t}$$

where i is intensity (mm/hr), P is rainfall depth (mm), and t is duration (hours). If 20 mm of rain fell over 4 hours, the intensity is \(20 \div 4 = 5\) mm/hr. This is an average; real storms have bursts that exceed the mean.

Advertisement
Fraction diagram of depth in millimeters divided by duration in hours
Intensity equals rainfall depth (mm) divided by duration (hr).

Worked Example

Suppose a gauge recorded 25 mm of rain over 2 hours. $$\text{Intensity} = 25 \div 2 = 12.5 \text{ mm/hr}$$ Since this falls between 7.6 and 50 mm/hr, it is classified as heavy rain. The 2-hour period equals 120 minutes.

Advertisement

Intensity Comparison for Common Storm Scenarios

Rainfall intensity is the depth of rain divided by the time it took to fall: \(I = \frac{d}{t}\), with \(d\) in millimetres and \(t\) in hours. The same depth can be a gentle drizzle or a violent downpour depending on how long it lasts. The categories below use the commonly cited American Meteorological Society thresholds: light under 2.5 mm/hr, moderate 2.5 to 7.6 mm/hr, heavy 7.6 to 50 mm/hr, and violent above 50 mm/hr. Other agencies, including national weather services, use different cut-offs, so the label shown by the calculator may differ slightly from this table.

Scenario Calculation Intensity (mm/hr) Category (AMS thresholds)
10 mm in 0.5 hr \(10 \div 0.5\) 20 Heavy
10 mm in 5 hr \(10 \div 5\) 2 Light
25 mm in 24 hr \(25 \div 24\) ≈ 1.04 Light
50 mm in 1 hr \(50 \div 1\) 50 Heavy (at the upper limit, just below violent)
100 mm in 3 hr \(100 \div 3\) ≈ 33.3 Heavy

Key takeaways:

  • 10 mm of rain is identical in depth in the first two rows, yet the intensity differs tenfold (20 vs 2 mm/hr) because the duration differs tenfold.
  • A large 24-hour total such as 25 mm can still be light on average, since the intensity is spread over a whole day.
  • Intensity is an average over the chosen duration. Short bursts within a long storm can be much higher than the average shown here.

FAQ

What counts as heavy rain? A common classification: light rain < 2.5 mm/hr, moderate 2.5–7.6 mm/hr, heavy 7.6–50 mm/hr, and violent > 50 mm/hr.

Can I use minutes instead of hours? Convert minutes to hours first (divide by 60) before entering the duration, or enter a fractional hour (e.g. 30 minutes = 0.5 hr).

Is this average or peak intensity? This tool gives the average intensity over the whole period. Peak (short-burst) intensity is usually higher and requires finer time-resolution data.

Last updated:

Most popular in Weather and Climate

View all Weather and Climate calculators