What Is the Gallons Per Hour (GPH) Calculator?
Gallons per hour (GPH) is a measure of volumetric flow rate — how many gallons of liquid pass a point, fill a tank, or are consumed in one hour. This calculator divides a known volume in gallons by the time in hours to give you the average flow rate. It is handy for pumps, fuel burn, irrigation, water heaters, aquariums, and any situation where you need a steady rate from a total amount.
How to Use It
Enter the total volume in gallons and the time it took in hours, then read the GPH result. The calculator also converts the answer to gallons per minute (GPM) for convenience. If your time is in minutes, divide by 60 first (for example, 30 minutes = 0.5 hours).
The Formula Explained
The equation is simply GPH = Volume ÷ Time. Volume is the number of gallons and time is the number of hours. Because it is a rate, the units cancel to gallons per hour. To get GPM, divide the GPH by 60, since there are 60 minutes in an hour.
$$\text{GPH} = \frac{\text{Volume (gallons)}}{\text{Time (hours)}}$$
Worked Example
Suppose a pump moves 500 gallons of water in 10 hours. Then $$\text{GPH} = 500 \div 10 = 50 \text{ gallons per hour}.$$ Converting to GPM: \(50 \div 60 \approx 0.83\) GPM. So the pump averages about 50 gallons every hour, or roughly 0.83 gallons each minute.
GPH Conversion Table
All values below use the US liquid gallon (3.785411784 L) unless labeled imperial. Imperial (UK) gallons are about 20% larger, so do not mix the two.
| 1 US GPH equals | Value |
|---|---|
| Gallons per minute (GPM) | 0.016667 |
| Liters per hour (L/h) | 3.78541 |
| Liters per minute (L/min) | 0.063090 |
| Cubic meters per hour (m³/h) | 0.00378541 |
| Cubic feet per hour (ft³/h) | 0.133681 |
| Imperial gallons per hour | 0.832674 |
Common reverse conversions (to US GPH)
| Unit | Equals in US GPH |
|---|---|
| 1 GPM | 60 GPH |
| 1 L/h | 0.264172 GPH |
| 1 L/min | 15.8503 GPH |
| 1 m³/h | 264.172 GPH |
| 1 ft³/h | 7.48052 GPH |
| 1 imperial GPH | 1.20095 GPH |
To convert GPH to GPM, divide by 60; to convert GPM to GPH, multiply by 60.
Typical GPH Scenarios Compared
Each row uses \(\text{GPH} = \text{Volume} \div \text{Time}\) and \(\text{GPM} = \text{GPH} \div 60\), in US gallons.
| Volume (gal) | Time (h) | GPH | GPM |
|---|---|---|---|
| 500 | 10 | 50 | 0.8333 |
| 120 | 4 | 30 | 0.5 |
| 25 | 0.5 | 50 | 0.8333 |
| 1,000 | 8 | 125 | 2.0833 |
| 15 | 3 | 5 | 0.0833 |
Note that 500 gal in 10 h and 25 gal in 0.5 h give the same rate (50 GPH): the rate depends only on the ratio of volume to time, not on the totals.
FAQ
Can I use minutes instead of hours? Convert minutes to hours by dividing by 60, then enter the result. For example, 45 minutes = 0.75 hours.
What if the time is zero? Flow rate is undefined when time is zero, so the calculator returns 0 — enter a positive time value.
How do I convert GPH to liters per hour? Multiply GPH by 3.78541 to get liters per hour (US gallons).