Gallons Per Hour (GPH) Calculator

Gallons Per Hour (GPH) Calculator

Popular AI Skill PRO

Enter Calculation

Formula

GPH=Volume (gallons)Time (hours)\text{GPH} = \frac{\text{Volume (gallons)}}{\text{Time (hours)}}

Example

GPH=10008=125\text{GPH} = \frac{1000}{8} = 125
Usage stats

Advertisement

Results

Flow Rate
125
gallons per hour (GPH)
Gallons per minute (GPM) 2.0833

Report an error on this page

What Is the Gallons Per Hour (GPH) Calculator?

Gallons per hour (GPH) is a measure of volumetric flow rate — how many gallons of liquid pass a point, fill a tank, or are consumed in one hour. This calculator divides a known volume in gallons by the time in hours to give you the average flow rate. It is handy for pumps, fuel burn, irrigation, water heaters, aquariums, and any situation where you need a steady rate from a total amount.

How to Use It

Enter the total volume in gallons and the time it took in hours, then read the GPH result. The calculator also converts the answer to gallons per minute (GPM) for convenience. If your time is in minutes, divide by 60 first (for example, 30 minutes = 0.5 hours).

The Formula Explained

The equation is simply GPH = Volume ÷ Time. Volume is the number of gallons and time is the number of hours. Because it is a rate, the units cancel to gallons per hour. To get GPM, divide the GPH by 60, since there are 60 minutes in an hour.

$$\text{GPH} = \frac{\text{Volume (gallons)}}{\text{Time (hours)}}$$
Advertisement
Diagram showing volume divided by time equals flow rate
GPH is total gallons divided by the elapsed time in hours.

Worked Example

Suppose a pump moves 500 gallons of water in 10 hours. Then $$\text{GPH} = 500 \div 10 = 50 \text{ gallons per hour}.$$ Converting to GPM: \(50 \div 60 \approx 0.83\) GPM. So the pump averages about 50 gallons every hour, or roughly 0.83 gallons each minute.

Container filling over time with a flow rate readout
Measuring how many gallons fill in a known number of hours gives the GPH rate.

GPH Conversion Table

All values below use the US liquid gallon (3.785411784 L) unless labeled imperial. Imperial (UK) gallons are about 20% larger, so do not mix the two.

1 US GPH equals Value
Gallons per minute (GPM) 0.016667
Liters per hour (L/h) 3.78541
Liters per minute (L/min) 0.063090
Cubic meters per hour (m³/h) 0.00378541
Cubic feet per hour (ft³/h) 0.133681
Imperial gallons per hour 0.832674

Common reverse conversions (to US GPH)

Unit Equals in US GPH
1 GPM 60 GPH
1 L/h 0.264172 GPH
1 L/min 15.8503 GPH
1 m³/h 264.172 GPH
1 ft³/h 7.48052 GPH
1 imperial GPH 1.20095 GPH

To convert GPH to GPM, divide by 60; to convert GPM to GPH, multiply by 60.

Advertisement

Typical GPH Scenarios Compared

Each row uses \(\text{GPH} = \text{Volume} \div \text{Time}\) and \(\text{GPM} = \text{GPH} \div 60\), in US gallons.

Volume (gal) Time (h) GPH GPM
500 10 50 0.8333
120 4 30 0.5
25 0.5 50 0.8333
1,000 8 125 2.0833
15 3 5 0.0833

Note that 500 gal in 10 h and 25 gal in 0.5 h give the same rate (50 GPH): the rate depends only on the ratio of volume to time, not on the totals.

FAQ

Can I use minutes instead of hours? Convert minutes to hours by dividing by 60, then enter the result. For example, 45 minutes = 0.75 hours.

What if the time is zero? Flow rate is undefined when time is zero, so the calculator returns 0 — enter a positive time value.

How do I convert GPH to liters per hour? Multiply GPH by 3.78541 to get liters per hour (US gallons).

Last updated:

Most popular in Physics and Engineering

View all Physics and Engineering calculators