Square Inches of a Rectangle Calculator

Square Inches of a Rectangle Calculator

Popular AI Skill PRO
Rectangle
Worked stepsStep 2 of 2

Area A=l⋅wA = l \cdot w, perimeter P=2(l+w)P = 2(l + w), diagonal d=l2+w2d = \sqrt{l^2 + w^2}

Download figure
Figure data
Length8
Width10
Area80
Rectangle in the Library: formulas and every calculator

Enter Calculation

Results

Rectangle Area
80
square inches (in²)
Area in square feet 0.5556 ft²

Formula

Area=Length (in)×Width (in)\text{Area} = \text{Length (in)} \times \text{Width (in)}

Example

Area=8×10=80\text{Area} = 8 \times 10 = 80
Usage stats

Advertisement

Report an error on this page

What is the Square Inches of a Rectangle Calculator?

This tool computes the area of any rectangle measured in inches. Enter the length and width in inches and it returns the surface area in square inches (in²), along with a bonus conversion to square feet. It's handy for tiling, fabric cutting, picture framing, sheet material estimation, and any project where measurements come in inches.

How to use it

Measure the two sides of your rectangle in inches. Type the longer side as the length and the shorter side as the width (the order doesn't actually matter for area). Press calculate and the result shows the total square inches plus the equivalent square feet.

The formula explained

The area of a rectangle is simply length times width: $$A = l \times w$$. Because both measurements are in inches, the product is in square inches. To convert to square feet, divide by 144, because one square foot equals \(12 \text{ in} \times 12 \text{ in} = 144 \text{ in}^2\).

Advertisement
Rectangle with length and width labeled, area shaded
Area equals length times width, measured in square inches.

Worked example

Suppose a rectangular panel is 12 inches long and 8 inches wide. Multiply: $$12 \times 8 = 96 \text{ square inches}.$$ To express that in square feet, divide by 144: $$96 \div 144 = 0.6667 \text{ ft}^2.$$ So the panel covers 96 in² or about 0.67 ft².

Rectangle divided into a grid of unit squares
Each small square represents one square inch, filling the rectangle's area.

Square Inch Conversion Table

One square inch (in²) is a square measuring exactly 1 inch on each side. Since 1 inch = 2.54 cm exactly, the metric factors below are exact. The imperial factors come from 12 in = 1 ft and 36 in = 1 yd.

From To Factor
1 in² Square feet (ft²) 1/144 ≈ 0.006944 ft²
1 in² Square yards (yd²) 1/1296 ≈ 0.000772 yd²
1 in² Square centimeters (cm²) 6.4516 cm²
1 in² Square millimeters (mm²) 645.16 mm²
1 in² Square meters (m²) 0.00064516 m²
1 ft² Square inches 144 in²
1 yd² Square inches 1296 in²
1 cm² Square inches ≈ 0.155 in²

To convert square inches to square feet, divide by 144: \(\text{ft}^2 = \text{in}^2 \div 144\). To go from square feet to square inches, multiply by 144.

Common Rectangle Sizes in Square Inches

Each area is length × width in inches; dividing by 144 gives square feet. Sizes are nominal; real products may differ slightly (for example, lumber and some tiles).

Item Length × Width (in) Area (in²) Area (ft²)
Photo print 4 × 6 24 ≈ 0.167
Photo print 5 × 7 35 ≈ 0.243
Photo print 8 × 10 80 ≈ 0.556
US Letter paper 8.5 × 11 93.5 ≈ 0.649
Photo/frame 11 × 14 154 ≈ 1.069
Floor tile 12 × 12 144 1
Poster 24 × 36 864 6
Plywood sheet (4 ft × 8 ft) 48 × 96 4608 32

Example: \(48 \times 96 = 4608\ \text{in}^2\), and \(4608 \div 144 = 32\ \text{ft}^2\).

Advertisement

Practical Tips for Measuring and Ordering Materials

  1. Measure precisely. Measure to the nearest 1/16 in, or use decimals (for example, 8.5 in rather than 8 1/2 in) so the numbers multiply cleanly.
  2. Use the same unit on both sides. If one side is in feet, convert it to inches first by multiplying by 12. Example: a 3 ft × 30 in panel becomes \(36 \times 30 = \)1080 in², which is 7.5 ft².
  3. Add a waste allowance. For tile, fabric, flooring, or sheet goods, buying roughly 5–10% extra is a common rule of thumb to cover cuts, pattern matching, and mistakes. Complex layouts may need more. For 1080 in² of material at 10% extra: \(1080 \times 1.10 = 1188\ \text{in}^2\).
  4. Round up to whole units. Materials are sold in whole tiles, sheets, or yards, so round your final count up, never down.
  5. Split irregular shapes. For L-shaped or other non-rectangular areas, divide the shape into rectangles, find each area, and add them together. For a cutout, subtract its area instead.
  6. Check the unit you are ordering in. Suppliers may price per ft², yd², or m², so convert your in² result using the table above before comparing prices.

FAQ

Does it matter which side I call length? No. Multiplication is commutative, so \(12 \times 8\) and \(8 \times 12\) both give 96 in².

How do I convert square inches to square feet? Divide by 144. There are 144 square inches in one square foot.

Can I use decimal inches? Yes. You can enter fractional measurements such as 10.5 inches, and the calculator handles them precisely.

Last updated:

Most popular in Geometry

View all Geometry calculators