What It Does
This calculator finds the floor area of a rectangular room from its length and width, and converts the result between square feet and square meters. It is useful for flooring, paint, tiling, and real-estate estimates anywhere in the world.
How to Use It
Enter the length and width of the room, then choose whether your measurements are in feet or meters. The calculator multiplies the two dimensions to get the area, then shows the equivalent value in both square feet and square meters.
The Formula Explained
Area of a rectangle is simply \(A = \text{length} \times \text{width}\). To convert units we use \(1\ \text{ft}^2 = 0.09290304\ \text{m}^2\), and \(1\ \text{m}^2 \approx 10.7639\ \text{ft}^2\). If you measure in meters, the area is computed in square meters first, then scaled up to square feet.
$$\begin{aligned} \text{Area}_{ft^2} &= \text{Length (ft)} \times \text{Width (ft)} \\[0.6em] \text{Area}_{m^2} &= \text{Area}_{ft^2} \times 0.09290304 \end{aligned}$$
Worked Example
A room measured at 12 ft by 10 ft has an area of \(12 \times 10 = 120\) square feet. Converting:
$$120 \times 0.09290304 \approx 11.15 \text{ square meters}$$A room of 4 m by 5 m is 20 square meters, which is
$$20 \times 10.7639 \approx 215.28 \text{ square feet}$$
Square Feet to Square Meters Quick Conversion Table
The exact definition is 1 ft² = 0.09290304 m², so 1 m² ≈ 10.7639 ft². Values below are rounded to two decimals.
Square feet to square meters
| Area (ft²) | Area (m²) |
|---|---|
| 50 | 4.65 |
| 100 | 9.29 |
| 120 | 11.15 |
| 150 | 13.94 |
| 200 | 18.58 |
| 250 | 23.23 |
| 300 | 27.87 |
| 500 | 46.45 |
| 1000 | 92.90 |
Square meters to square feet
| Area (m²) | Area (ft²) |
|---|---|
| 5 | 53.82 |
| 10 | 107.64 |
| 15 | 161.46 |
| 20 | 215.28 |
| 25 | 269.10 |
| 30 | 322.92 |
| 50 | 538.20 |
| 100 | 1076.39 |
Worked formula: a room of 120 ft² is \(120 \times 0.09290304 = 11.1483648 \approx 11.15\) m².
Practical Tips for Flooring, Paint and Tiling
- Add a waste allowance. For flooring and tile on a straightforward layout, add roughly 5–10% to the measured area to cover cuts, offcuts and breakage. For diagonal, herringbone or patterned layouts, allow about 10–15%.
- Round up to full boxes or packs. Flooring and tile are sold in whole cartons, each covering a fixed area, so divide your total by the coverage per box and round up. Buying one extra box is often wise in case of future repairs or batch colour differences.
- Measure at the widest points. For rooms with alcoves, bay windows or uneven walls, measure the longest length and widest width, or split the room into rectangles, calculate each one, and add them together.
- Use one unit throughout. Suppliers may list coverage in ft² or m². Convert your room area once, then compare it to the pack coverage in the same unit to avoid ordering errors.
- Paint is different. Paint coverage depends on wall area (perimeter × height, minus openings), not floor area, so do not reuse the floor figure.
Example: a room of 15 ft × 12 ft has an area of \(15 \times 12 = 180\) ft², which is \(180 \times 0.09290304 \approx\) 16.72 m². Adding a 10% waste allowance gives \(180 \times 1.10 = 198\) ft², or about 18.39 m², to order before rounding up to whole boxes.
Typical Room Sizes
These are general, approximate ranges seen in homes, not code requirements. Actual sizes vary widely by country, building style and age, and local building regulations may set their own minimums.
| Room type | Typical area (ft²) | Typical area (m²) |
|---|---|---|
| Bathroom | 35–60 | 3.3–5.6 |
| Bedroom | 100–200 | 9.3–18.6 |
| Kitchen | 80–200 | 7.4–18.6 |
| Living room | 150–400 | 13.9–37.2 |
| Home office | 70–150 | 6.5–13.9 |
Use these only as a rough sanity check on your own measurements; always measure the actual room before buying materials.
FAQ
Does this work for non-rectangular rooms? No — for L-shaped or irregular rooms, split them into rectangles, calculate each, and add the areas.
How many square feet in a square meter? About 10.7639 square feet.
Can I mix feet and meters? No, both length and width must use the same unit selected in the dropdown.