Triangle Area Calculator

Triangle Area Calculator

Popular AI Skill PRO
Triangle
Worked stepsStep 2 of 2

Area A = ½ · base · height

Download figure
Figure data
Base7.5
Height4
Area15.00
Triangle in the Library: formulas and every calculator

Enter Calculation

Formula

Area=Base×Height2\text{Area} = \frac{\text{Base} \times \text{Height}}{2}

Example

Area=7.5×42=15.00\text{Area} = \frac{7.5 \times 4}{2} = 15.00
Usage stats

Advertisement

Results

Triangle Area
15.00 square units
Base Length 7.50 units
Height 4.00 units
Perimeter 18.47 units

Report an error on this page

What This Triangle Area Calculator Does

This tool calculates the area of a triangle from two simple measurements: its base and its height. It is a universal geometry tool — the math is the same in every country and uses no currency or regional rules. Just enter the two values and you get an instant, accurate area, plus a bonus estimate of the triangle's perimeter.

The Inputs You Provide

  • Base: the length of one side of the triangle that you treat as the bottom edge.
  • Height: the perpendicular distance from that base up to the opposite vertex (the apex). This is the straight-up height, not the slanted side length.

Both values should use the same unit — centimetres, metres, inches, or any unit you like. The result comes out in that unit squared.

Triangle showing base b along the bottom and perpendicular height h to the apex
The base and the perpendicular height are the two measurements needed.

The Formula

The calculator uses the classic triangle area formula:

Area = (Base × Height) ÷ 2

Multiplying base by height gives the area of a rectangle that fully encloses the triangle; dividing by two leaves exactly the triangle inside it.

The tool also reports an estimated perimeter using:

Perimeter = Base + 2 × √((Base ÷ 2)² + Height²)

Note that this perimeter formula assumes an isosceles triangle, where the apex sits directly above the midpoint of the base. If your triangle is not isosceles, treat the perimeter as an approximation while the area remains exact.

Advertisement
A triangle and its copy forming a rectangle of base b and height h
Two copies of a triangle make a rectangle, so the area is half of base times height.

Worked Example

Suppose you enter a Base of 10 and a Height of 6:

  • Area = (10 × 6) ÷ 2 = 60 ÷ 2 = 30 square units
  • Perimeter = 10 + 2 × √((5)² + 6²) = 10 + 2 × √(25 + 36) = 10 + 2 × √61 ≈ 10 + 2 × 7.81 ≈ 25.62 units

So a triangle with a base of 10 and height of 6 covers 30 square units of area.

More Triangle Area Examples

All examples use \(\text{Area} = \frac{\text{base} \times \text{height}}{2}\). The height must be measured perpendicular to the chosen base.

Example 1: Base 7.5 cm, height 4 cm

\(\text{Area} = \frac{7.5 \times 4}{2} = \frac{30}{2} = \)15 cm²

Example 2: Right triangle with legs 12 m and 5 m

In a right triangle the two legs meet at 90°, so one leg can serve as the base and the other as the height.

\(\text{Area} = \frac{12 \times 5}{2} = \frac{60}{2} = \)30 m²

Example 3: Finding a missing height

Rearrange the formula: \(\text{height} = \frac{2 \times \text{Area}}{\text{base}}\). With area 48 and base 12:

\(\text{height} = \frac{2 \times 48}{12} = \frac{96}{12} = 8\)

Check: \(\frac{12 \times 8}{2} = 48\). The units of the height match the base's length unit (for an area in cm² and a base in cm, the height is in cm).

Area Unit Conversion Table

Use this table to convert a triangle's area between metric and imperial units. Values are rounded to the digits shown, except where noted as exact.

Unit Equivalents
1 mm² 0.01 cm² = 0.000001 m²
1 cm² 100 mm² = 0.0001 m² ≈ 0.155 in²
1 m² 1,000,000 mm² = 10,000 cm² ≈ 10.7639 ft² ≈ 1.19599 yd²
1 km² 1,000,000 m² ≈ 247.105 acres
1 in² 6.4516 cm² (exact) = 645.16 mm²
1 ft² 144 in² (exact) ≈ 0.092903 m²
1 yd² 9 ft² (exact) ≈ 0.836127 m²
1 acre ≈ 4,046.86 m² = 43,560 ft² = 4,840 yd² (international acre)

Note: area conversion factors are the square of the linear factors. Because 1 in = 2.54 cm exactly, \(1\ \text{in}^2 = 2.54^2 = 6.4516\ \text{cm}^2\). Likewise \(1\ \text{ft}^2 = 12^2 = 144\ \text{in}^2\) and \(1\ \text{m}^2 = 100^2 = 10{,}000\ \text{cm}^2\). Always convert lengths to the same unit before calculating, or convert the final area using the squared factor.

Advertisement

Triangle Terms Explained

  • Base: the side of the triangle chosen as the reference for the area calculation. Any of the three sides can be the base.
  • Height (altitude): the perpendicular distance from the base (or its extension) to the opposite vertex. It must match the chosen base.
  • Apex / vertex: a vertex is a corner where two sides meet. The apex is the vertex opposite the chosen base.
  • Perpendicular: a line meeting another at a 90° angle. The height is always perpendicular to the base.
  • Isosceles triangle: a triangle with at least two equal sides (and two equal angles).
  • Scalene triangle: a triangle with three sides of different lengths and three different angles.
  • Right triangle: a triangle with one 90° angle. Its two legs are perpendicular, so they can serve as base and height.
  • Perimeter: the total distance around the triangle, i.e. the sum of its three side lengths. It is not needed for the base-and-height area formula.

Any side can serve as the base, provided you use the perpendicular height that matches it. Every valid base-height pair for the same triangle gives the same area.

Frequently Asked Questions

Does the height have to be perpendicular to the base? Yes. The formula only works when the height is measured at a right angle to the base. Using a slanted side instead will give a wrong, oversized result.

What units does it use? Whatever unit you enter. Put both base and height in the same unit and the area is in that unit squared (e.g. cm² or m²).

Is the perimeter always correct? It is exact only for isosceles triangles where the apex is centred over the base. For scalene triangles, use it as a rough guide and measure each side directly for precision.

Last updated:

Most popular in Geometry

View all Geometry calculators