Granite Slab Linear Meter Calculator

Granite Slab Linear Meter Calculator

Emerging AI Skill PRO

Enter Calculation

Formula

Linear meters=Granite area (m2)Slab width (cm)100\text{Linear meters} = \frac{{{\text{Granite area (m}^2\text{)}}}}{\dfrac{\text{Slab width (cm)}}{100}}

Example

Linear meters=315100=20.00\text{Linear meters} = \frac{3}{\dfrac{15}{100}} = 20.00
Usage stats

Advertisement

Results

Linear (running) meters required
20.00
linear meters
Granite area 3 m²
Slab width 15 cm (0.15 m)

Report an error on this page

What this calculator does

The Granite Slab Linear Meter Calculator converts a granite surface measured in square meters into the number of linear (running) meters you need to order for a slab of a fixed width. Stone yards and fabricators often sell and cut granite as continuous strips of a set width, so knowing the running length is essential for accurate quotes and ordering.

Long narrow granite slab strip with width w and running length L marked
A granite slab of fixed width; its running (linear) length L is what we solve for.

The formula explained

Because area equals length multiplied by width, the running length is simply the area divided by the width. The slab width is entered in centimeters, so it is first converted to meters by dividing by 100:

$$L = \frac{A}{W/100}$$

where \(L\) = linear meters, \(A\) = granite area in square meters, and \(W\) = slab width in centimeters.

Advertisement
Square area transformed into a long narrow strip of fixed width
The same granite area, laid out as a fixed-width band, becomes a length in linear meters.

How to use it

Enter the total granite area you need to cover in square meters, then enter the width of the slab or strip you are buying in centimeters. The calculator returns the running length in linear meters. To include waste, add a cutting allowance to the area before you calculate.

Worked example

Suppose you need \(3\ \text{m}^2\) of granite and the slab strip is \(15\ \text{cm}\) wide. Convert the width to meters \(\left(15/100 = 0.15\ \text{m}\right)\) and divide:

$$L = \frac{3}{0.15} = 20\ \text{m}$$

So you would order 20 linear meters of the 15 cm strip.

Advertisement

Linear Meters Across Common Slab Widths

For fixed-width granite strips, the running (linear) length needed to cover a given area is found by dividing the area by the strip width in meters: \( L = \dfrac{A}{W/100} \), where \(A\) is the area in square meters and \(W\) is the width in centimeters. The narrower the strip, the more linear meters are required to cover the same area.

Granite area 10 cm wide 15 cm wide 20 cm wide 30 cm wide
2 m² 20.00 m 13.33 m 10.00 m 6.67 m
3 m² 30.00 m 20.00 m 15.00 m 10.00 m
5 m² 50.00 m 33.33 m 25.00 m 16.67 m

Each cell uses the same formula; for example, 5 m² at a 20 cm width gives \( L = \dfrac{5}{20/100} = \dfrac{5}{0.20} = 25 \) m.

FAQ

Why convert width to meters? Area is in square meters, so both dimensions must share the same unit. Dividing centimeters directly would give a value 100 times too small.

Does this account for cutting waste? No. Add a percentage to your area first if you want a waste margin, since real cuts and joints produce offcuts.

Can I use it for tile or laminate strips? Yes. Any material sold as a fixed-width running length works with the same formula.

Last updated:

Most popular in Industry-Specific

View all Industry-Specific calculators