What this calculator does
The Granite Slab Linear Meter Calculator converts a granite surface measured in square meters into the number of linear (running) meters you need to order for a slab of a fixed width. Stone yards and fabricators often sell and cut granite as continuous strips of a set width, so knowing the running length is essential for accurate quotes and ordering.
The formula explained
Because area equals length multiplied by width, the running length is simply the area divided by the width. The slab width is entered in centimeters, so it is first converted to meters by dividing by 100:
$$L = \frac{A}{W/100}$$
where \(L\) = linear meters, \(A\) = granite area in square meters, and \(W\) = slab width in centimeters.
How to use it
Enter the total granite area you need to cover in square meters, then enter the width of the slab or strip you are buying in centimeters. The calculator returns the running length in linear meters. To include waste, add a cutting allowance to the area before you calculate.
Worked example
Suppose you need \(3\ \text{m}^2\) of granite and the slab strip is \(15\ \text{cm}\) wide. Convert the width to meters \(\left(15/100 = 0.15\ \text{m}\right)\) and divide:
$$L = \frac{3}{0.15} = 20\ \text{m}$$
So you would order 20 linear meters of the 15 cm strip.
Linear Meters Across Common Slab Widths
For fixed-width granite strips, the running (linear) length needed to cover a given area is found by dividing the area by the strip width in meters: \( L = \dfrac{A}{W/100} \), where \(A\) is the area in square meters and \(W\) is the width in centimeters. The narrower the strip, the more linear meters are required to cover the same area.
| Granite area | 10 cm wide | 15 cm wide | 20 cm wide | 30 cm wide |
|---|---|---|---|---|
| 2 m² | 20.00 m | 13.33 m | 10.00 m | 6.67 m |
| 3 m² | 30.00 m | 20.00 m | 15.00 m | 10.00 m |
| 5 m² | 50.00 m | 33.33 m | 25.00 m | 16.67 m |
Each cell uses the same formula; for example, 5 m² at a 20 cm width gives \( L = \dfrac{5}{20/100} = \dfrac{5}{0.20} = 25 \) m.
FAQ
Why convert width to meters? Area is in square meters, so both dimensions must share the same unit. Dividing centimeters directly would give a value 100 times too small.
Does this account for cutting waste? No. Add a percentage to your area first if you want a waste margin, since real cuts and joints produce offcuts.
Can I use it for tile or laminate strips? Yes. Any material sold as a fixed-width running length works with the same formula.