Nitrox Gas Blending Calculator

Nitrox Gas Blending Calculator

Emerging AI Skill PRO

Enter Calculation

Assumes an empty cylinder filled by partial pressure: add pure oxygen first, then top up with air (21% O₂).

Formula

PO2=(Target O2 (%)100−0.21)×Final Pressure (psi)1−0.21Pair=Final Pressure (psi)−PO2\begin{gathered} P_{O_2} = \frac{\left(\frac{{{\text{Target O}_2\text{ (\%)}}}}{100} - 0.21\right) \times \text{Final Pressure (psi)}}{1 - 0.21} \\[1.5em] P_{air} = \text{Final Pressure (psi)} - P_{O_2} \end{gathered}
Show calculation steps (1)
  1. Partial Pressure Blending (bar)

    PO2=(Target O2 (%)100−0.21)×Final Pressure (bar)1−0.21Pair=Final Pressure (bar)−PO2\begin{gathered} P_{O_2} = \frac{\left(\frac{{{\text{Target O}_2\text{ (\%)}}}}{100} - 0.21\right) \times \text{Final Pressure (bar)}}{1 - 0.21} \\[1.5em] P_{air} = \text{Final Pressure (bar)} - P_{O_2} \end{gathered}

    Fill pure O2 to P_O2, then top with air (21% O2) to the final pressure, both in bar.

Usage stats

Advertisement

Results

Add Pure Oxygen To
417.7
psi of O₂ partial pressure
Step 1 — Add pure O₂ up to 417.7 psi
Step 2 — Top up with air to reach 3,000 psi
Air added 2,582.3 psi
Target mix EAN32 (32% O₂)

Report an error on this page

What this calculator does

The Nitrox Gas Blending Calculator tells scuba divers and gas blenders how much pure oxygen and how much air to add when mixing enriched air nitrox (EANx) by the partial-pressure method. Starting from an empty cylinder, you first fill with pure oxygen to a calculated pressure, then top up with air (which is 21% oxygen) until you reach your final fill pressure. The result is a cylinder holding your exact target oxygen fraction.

The formula explained

Because the total oxygen in the tank is the oxygen you add plus the 21% oxygen that comes in the air, the oxygen partial pressure needed is:

$$P_{O_2} = \frac{(F_{O_2} - 0.21)\,P_f}{0.79}$$

Here \(F_{O_2}\) = target oxygen fraction (for EAN32, \(F_{O_2}=0.32\)) and \(P_f\) = final fill pressure. The air added is simply the remainder:

$$P_{air} = P_f - P_{O_2}$$
Scuba cylinder cross-section with a lower oxygen fill band and an upper air top-up band marked on a pressure scale
Partial-pressure blending stacks a measured oxygen fill beneath an air top-up until the cylinder reaches its final pressure.

How to use it

Enter your target oxygen percentage, your final fill pressure, and the pressure unit (psi or bar). The calculator returns the oxygen pressure for step one and the air added for step two. Add oxygen slowly, let the cylinder cool, then top with air and always analyze the final mix before diving.

Advertisement
Three-step sequence showing an empty cylinder, an oxygen fill, then an air top-up to full pressure
The blending sequence: start empty, add oxygen to the calculated pressure, then top up with air.

Worked example

To blend EAN32 to a 3000 psi fill:

$$P_{O_2} = \frac{(0.32 - 0.21)\times 3000}{0.79} = \frac{330}{0.79} \approx 417.7\ \text{psi}$$$$P_{air} = 3000 - 417.7 = 2582.3\ \text{psi}$$

So you would add pure oxygen to about 418 psi, then top up with air to 3000 psi.

FAQ

Why divide by 0.79? Air is 21% oxygen and 79% other gases; the 0.79 accounts for the oxygen already supplied by the air fraction.

Does the cylinder need to be empty? This calculation assumes an empty start. Blending into a partly full tank requires accounting for the existing gas.

Should I always analyze the mix? Yes. Temperature, real-gas behavior, and the true 20.9% oxygen content of air mean you must verify the final mix with an oxygen analyzer before diving.

Last updated:

Most popular in Adventure and Travel

View all Adventure and Travel calculators