Parallelogram Area Calculator

Parallelogram Area Calculator

Popular AI Skill PRO
Parallelogram
Worked stepsStep 2 of 2

Area A = base · height

Download figure
Figure data
Base8
Height10
Area80
Parallelogram in the Library: formulas and every calculator

Enter Calculation

Formula

Area=Base×Height\text{Area} = \text{Base} \times \text{Height}

Example

Area=8×10=80\text{Area} = 8 \times 10 = 80
Usage stats

Advertisement

Results

Area of Parallelogram
80
Base 8
Height 10

Report an error on this page

What This Calculator Does

The Parallelogram Area Calculator works out the area of any parallelogram from two simple measurements: the base and the perpendicular height. A parallelogram is a four-sided shape with two pairs of parallel sides — squares, rectangles and rhombuses are all special cases. Whether you're solving homework, planning a tiling layout, or checking a drawing, this tool gives an instant, accurate result.

The Inputs You Enter

  • Base — the length of one side of the parallelogram, measured in any unit (cm, m, inches, etc.).
  • Height — the perpendicular distance between the base and the opposite parallel side. Important: this is not the length of the slanted side, but the straight-line height measured at a right angle to the base.

Both fields accept decimal numbers. The calculator reads each value, multiplies them together, and displays the area in square units of whatever unit you used.

The Formula

The calculation is the classic parallelogram area formula:

$$\text{Area} = \text{Base} \times \text{Height}$$

Behind the scenes the tool converts both entries to numbers and simply multiplies them. There are no hidden steps — the result is the direct product of your two values. If you enter a unit of length (say metres), the result is in square metres.

Advertisement
Parallelogram with base and perpendicular height labeled
The area equals base times the perpendicular height, not the slanted side.

Worked Example

Suppose a parallelogram has a base of 8 cm and a perpendicular height of 5 cm. Enter Base = 8 and Height = 5. The calculator computes:

$$\text{Area} = 8 \times 5 = 40 \text{ cm}^2$$

If you change the height to 6.5 cm, the area becomes \(8 \times 6.5 = 52 \text{ cm}^2\). Try different values to see how area scales directly with each measurement.

Parallelogram sheared into a rectangle showing equal area
Cutting a triangle from one side and moving it converts the parallelogram into a rectangle of the same area.

Area Unit Conversion Table

A parallelogram's area is always in square units, so the base and height must use the same length unit before you multiply. Use this table to convert the result into another area unit. The values are rounded to the digits shown.

Unit Equivalent values
1 cm² 100 mm² = 0.0001 m² ≈ 0.155 in²
1 m² 10,000 cm² = 1,000,000 mm² ≈ 10.7639 ft² ≈ 1.19599 yd²
1 km² 1,000,000 m² = 100 hectares ≈ 247.105 acres
1 in² 6.4516 cm² = 645.16 mm²
1 ft² 144 in² ≈ 0.092903 m²
1 yd² 9 ft² = 1,296 in² ≈ 0.836127 m²
1 hectare 10,000 m² ≈ 2.47105 acres
1 acre 43,560 ft² ≈ 4,046.86 m² ≈ 0.404686 hectares

Remember that area units scale with the square of the length factor. Since 1 ft = 12 in, 1 ft² = 12² = 144 in², not 12 in².

Parallelogram Area Scenarios Compared

The area is \(A = b \times h\), where \(h\) is the perpendicular height and not the slanted side. The table compares five cases, all in centimetres. The slant side \(s\) is linked to the height by \(h = s \sin\theta\), where \(\theta\) is the angle between the base and the slant side.

Case Base (cm) Height (cm) Slant side / angle Area (cm²)
Reference 8 5 10 cm at 30° 8 × 5 = 40
Same base and height, different slant 8 5 ≈ 7.07 cm at 45° 8 × 5 = 40
Same base, doubled height 8 10 20 cm at 30° 8 × 10 = 80
Rectangle (special case) 8 5 5 cm at 90° 8 × 5 = 40
Halved base 4 5 10 cm at 30° 4 × 5 = 20

Takeaways: area is proportional to the height when the base is fixed, so doubling the height doubles the area. Changing the slant angle while keeping base and height fixed does not change the area. The first, second and fourth rows all have 40 cm². The slant side gets longer as the angle gets smaller, but only the perpendicular height matters.

Advertisement

Key Terms Glossary

Parallelogram
A quadrilateral whose opposite sides are parallel and equal in length. Opposite angles are equal, and consecutive angles add up to 180°.
Base
Any one side chosen as the reference side, usually drawn at the bottom. The height must be measured relative to this side.
Perpendicular height
The shortest distance between the base and the opposite side, measured at 90° to the base. It is not the length of the slanted side.
Slant (lateral) side
The non-base side of the parallelogram. Its length \(s\) relates to the height by \(h = s \sin\theta\), where \(\theta\) is the angle between the base and that side.
Altitude
Another word for the perpendicular height: a segment from a vertex perpendicular to the line containing the opposite base. It may fall outside the shape if the angle is obtuse.
Area in square units
The amount of surface enclosed, counted in unit squares such as cm², m² or ft². For a parallelogram, \(A = b \times h\).

Special cases

  • Rectangle: a parallelogram with four right angles. The slant side is perpendicular to the base, so the height equals the side length and \(A = b \times h\) is the familiar length × width.
  • Rhombus: a parallelogram with four equal sides. Its area is still base × height, which equals \(s^2 \sin\theta\) for side \(s\).
  • Square: both a rectangle and a rhombus, with four equal sides and four right angles, so \(A = s^2\).

Frequently Asked Questions

Is the height the same as the slanted side length? No. The height must be measured perpendicular to the base. If you only know the slant side and the angle, multiply the slant length by the sine of the angle to find the true height first.

What units should I use? Use any unit you like, but keep base and height in the same unit. The result will be in those units squared.

Does this work for rectangles and squares? Yes. A rectangle is a parallelogram with right angles, so base × height gives its area too. For a square, base and height are equal.

Last updated:

Most popular in Geometry

View all Geometry calculators