Rectangle Width Calculator

Rectangle Width Calculator

Popular AI Skill PRO
Rectangle
Worked stepsStep 2 of 2

Area A=l⋅wA = l \cdot w, perimeter P=2(l+w)P = 2(l + w), diagonal d=l2+w2d = \sqrt{l^2 + w^2}

Download figure
Figure data
Length6
Width4
Area24
Perimeter20
Rectangle in the Library: formulas and every calculator

Enter Calculation

Formula

Width=AreaLength\text{Width} = \frac{\text{Area}}{\text{Length}}

Example

Width=246=4\text{Width} = \frac{24}{6} = 4
Usage stats

Advertisement

Results

Length 6.0 cm
Width 4 cm
Area 24.0 cm²
Perimeter 20 cm
Width: 4 cm
Length: 6.0 cm

Note: The rectangle visualization is not to scale. It's just a representation of the shape.

Report an error on this page

What Is the Rectangle Width Calculator?

The Rectangle Width Calculator is a simple geometry tool that finds the unknown width of a rectangle when you already know other measurements, such as its area and length, or its perimeter and length. Instead of rearranging formulas by hand, you enter the values you have and the calculator instantly returns the missing width. It works with any unit of measurement — centimeters, meters, inches, or feet — as long as you stay consistent throughout your calculation.

How to Use It

  • Choose which information you know: area and length, or perimeter and length.
  • Enter the known values into their fields.
  • Make sure both numbers use the same unit (for example, both in meters).
  • Read the calculated width in the result box.

This makes it handy for everyday tasks like planning a room layout, sizing a garden bed, cutting fabric, or ordering building materials.

The Formulas Explained

A rectangle has two key measurements: length (\(L\)) and width (\(W\)). The calculator uses one of these standard relationships depending on what you know:

  • From area: $$\text{Width} = \frac{\text{Area}}{\text{Length}}$$
  • From perimeter: $$\text{Width} = \frac{\text{Perimeter}}{2} - \text{Length}$$

Both formulas come from the basic definitions: area equals length times width (\(A = L \times W\)), and perimeter equals twice the sum of length and width (\(P = 2 \times (L + W)\)).

Advertisement
Rectangle with length along the bottom, width along the side, and area shaded inside
Width equals area divided by length.

Worked Example

Suppose you have a rectangular patio with an area of 24 square meters and a length of 6 meters. Using the area formula:

  • $$\text{Width} = \frac{\text{Area}}{\text{Length}}$$
  • $$\text{Width} = \frac{24}{6} = \textbf{4 meters}$$

If instead you knew the perimeter was 20 meters and the length was 6 meters: \(\text{Width} = \frac{20}{2} - 6 = 10 - 6 = \textbf{4 meters}\). Both methods confirm the same width.

Rectangle showing example values for area and length with the unknown width highlighted
Dividing the known area by the known length gives the missing width.

Width Results for Common Rectangle Sizes

The calculator uses \(\text{Width} = \frac{\text{Area}}{\text{Length}}\). When you know the perimeter instead of the area, use \(\text{Width} = \frac{P}{2} - \text{Length}\). The perimeter rows below use that second formula, which this tool does not compute. All rows use the same length unit (cm) and the matching area unit (cm²).

Known values Formula used Width
Area 24 cm², length 6 cm \(\frac{24}{6}\) 4 cm
Area 50 cm², length 10 cm \(\frac{50}{10}\) 5 cm
Area 18 cm², length 9 cm \(\frac{18}{9}\) 2 cm
Perimeter 20 cm, length 6 cm \(\frac{20}{2} - 6\) 4 cm
Perimeter 30 cm, length 15 cm \(\frac{30}{2} - 15\) 0 cm (invalid, no rectangle exists)

A width of zero or less means the given values cannot describe a real rectangle. In the last row, the length alone already uses up half of the perimeter.

Advertisement

Unit Conversions for Width and Area

Length

Unit Equivalent
1 in 2.54 cm (exact)
1 ft 12 in = 0.3048 m (exact)
1 yd 3 ft = 36 in = 0.9144 m (exact)
1 m 100 cm ≈ 3.2808 ft

Area

Unit Equivalent
1 in² 6.4516 cm²
1 ft² 144 in² ≈ 929.03 cm²
1 yd² 9 ft² ≈ 0.8361 m²
1 m² 10,000 cm² ≈ 10.7639 ft²

Keep units consistent. Area units are squared, so the length unit must match the area unit: m² with m, cm² with cm, ft² with ft, in² with in. Mixing them gives a wrong width.

Example: an area of 0.5 m² with a length of 50 cm. Convert the area first: \(0.5 \times 10{,}000 = 5{,}000\ \text{cm}^2\). Then \(\text{Width} = \frac{5000}{50} = 100\ \text{cm} = 1\ \text{m}\).

Frequently Asked Questions

What units should I use? Any unit works, but you must keep them consistent. If your area is in square feet, your length should be in feet so the width comes out in feet too.

Can I find length instead of width? Yes — the formulas are interchangeable. Just swap the roles of length and width since rectangles treat both dimensions the same way.

Why is my answer negative? A negative width usually means the perimeter value is too small for the given length. Double-check that your inputs describe a valid rectangle.

Last updated:

Most popular in Geometry

View all Geometry calculators