What Is the Milliamps to Amps Calculator?
This tool converts electric current measured in milliamps (mA) into amps (A), also called amperes. The ampere is the SI base unit of electric current, and a milliamp is one thousandth of an amp. The conversion is universal and applies to any electrical or electronic context worldwide.
How to Use It
Enter the current value in milliamps in the input field and the calculator immediately returns the equivalent value in amps. For example, a USB charger rated at 500 mA delivers 0.5 A, while a 2,000 mA fast charger delivers 2 A.
The Formula Explained
Because 1 amp equals exactly 1,000 milliamps, you convert by dividing the milliamp value by 1,000:
$$\text{Amps (A)} = \frac{\text{Current (mA)}}{1000}$$
To go the other direction, multiply amps by 1,000 to get milliamps.
Worked Example
Suppose a device draws 750 mA. Divide by 1,000: $$750 / 1000 = 0.75 \text{ A}.$$ So the device draws three quarters of an amp.
mA to A Conversion Table
One amp equals 1000 milliamps, so converting mA to A means dividing by 1000: \(A = \frac{mA}{1000}\). This relationship is part of the SI system and is the same everywhere.
| Milliamps (mA) | Amps (A) |
|---|---|
| 1 mA | 0.001 A |
| 10 mA | 0.01 A |
| 20 mA | 0.02 A |
| 50 mA | 0.05 A |
| 100 mA | 0.1 A |
| 250 mA | 0.25 A |
| 500 mA | 0.5 A |
| 1000 mA | 1 A |
| 2000 mA | 2 A |
| 2500 mA | 2.5 A |
| 5000 mA | 5 A |
Related units
| Unit | Equivalent in amps |
|---|---|
| 1 microamp (µA) | 0.000001 A (10-6 A) |
| 1 milliamp (mA) | 0.001 A (10-3 A) |
| 1 kiloamp (kA) | 1000 A |
Also, 1 mA = 1000 µA.
Typical Current Draw of Common Devices
The values below are typical or nominal figures for context only. Actual current depends on the specific device, load, and manufacturer specification, so always check the datasheet or rating label.
| Device / signal | Typical current (mA) | Typical current (A) |
|---|---|---|
| LED indicator | ~10–20 mA | ~0.01–0.02 A |
| 4–20 mA industrial control loop | 4 to 20 mA (signal range) | 0.004 to 0.02 A |
| USB 2.0 port (max per unit load spec) | 500 mA | 0.5 A |
| USB 3.0 port (max) | 900 mA | 0.9 A |
| Standard USB charger | 1000–2400 mA | 1–2.4 A |
| Smartphone fast charger (at lower voltage modes) | 2000–3000 mA | 2–3 A |
Note: the 4–20 mA loop is a signal range, not a power draw. Fast chargers often raise voltage as well as current, so the current figure alone does not give the power delivered.
FAQ
Is 1000 mA equal to 1 A? Yes. Exactly 1,000 milliamps equals 1 amp.
How many amps is 500 mA? \(500 / 1000 = 0.5\) A.
Does this work for AC and DC? Yes, the unit conversion is the same for both alternating and direct current — it simply rescales the magnitude.