What Is the Partial Pressure Calculator?
The Partial Pressure Calculator works out the pressure contributed by a single gas within a mixture of gases. It is based on Dalton's Law of Partial Pressures, a universal principle in chemistry and physics (not specific to any one country). When several gases share a container, each gas exerts its own pressure as if it occupied the space alone. This tool lets you find that individual share quickly using just two values: the total pressure of the mixture and the mole fraction of the gas you care about.
How to Use It
Enter the two required inputs, then read the result:
- Total Pressure (atm) — the combined pressure of all gases in the mixture, measured in atmospheres.
- Mole Fraction (0–1) — the proportion of the gas in question, expressed as a decimal between 0 and 1 (for example, 0.21 for oxygen in air).
The calculator returns the partial pressure of that gas in atm, and also converts the mole fraction into a percentage so you can see the gas composition at a glance.
The Formula Explained
The tool applies this equation:
Pi = Xi × Pt
Where Pi is the partial pressure of the gas, Xi is its mole fraction (0–1), and Pt is the total pressure of the mixture. The percentage shown is simply the mole fraction multiplied by 100.
Worked Example
Suppose a gas mixture has a total pressure of 2.5 atm, and nitrogen makes up a mole fraction of 0.78. Plugging these in:
Pi = 0.78 × 2.5 = 1.95 atm
So the partial pressure of nitrogen is 1.95 atm, and it accounts for 78% of the mixture's composition.
Pressure Unit Conversion Table
The calculator expects total pressure in atmospheres (atm). If your pressure is in another unit, convert it to atm first. The standard atmosphere is defined as exactly 101,325 Pa.
| Unit | Equal to 1 atm | 1 of this unit in atm |
|---|---|---|
| Pascal (Pa) | 101,325 Pa | ≈ 9.8692 × 10⁻⁶ atm |
| Kilopascal (kPa) | 101.325 kPa | ≈ 0.009869 atm |
| Bar | 1.01325 bar | ≈ 0.98692 atm |
| mmHg (torr) | 760 mmHg | 1/760 ≈ 0.0013158 atm |
| psi | ≈ 14.696 psi | ≈ 0.068046 atm |
How to apply them: to convert to atm, divide by the "Equal to 1 atm" value (for example, kPa ÷ 101.325) or multiply by the factor in the last column. Enter the converted number in the total pressure field. The mole fraction is dimensionless and needs no conversion.
Example: 380 mmHg ÷ 760 = 0.5 atm. Example: 2 bar × 0.98692 ≈ 1.974 atm.
If you want the answer in another unit, multiply the resulting atm value by the "Equal to 1 atm" figure, for example atm × 101.325 gives kPa.
Composition of Dry Air at Sea Level
Dry air is a useful reference mixture for checking partial pressure results. Using \(P_i = P_{total} \times x_i\) with a total pressure of 1 atm, each partial pressure equals the gas's mole fraction in atm.
| Gas | Approx. mole fraction | Partial pressure at 1 atm |
|---|---|---|
| Nitrogen (N₂) | 0.7808 | ≈ 0.781 atm |
| Oxygen (O₂) | 0.2095 | ≈ 0.2095 atm (≈ 0.209) |
| Argon (Ar) | 0.0093 | ≈ 0.0093 atm |
| Carbon dioxide (CO₂) | ≈ 0.0004 (roughly 420 ppm) | ≈ 0.0004 atm |
These values are approximate. Trace gases such as neon, helium, methane and krypton make up the small remainder. The CO₂ fraction changes slightly over time and with location, and it has been rising for decades. Real air also contains variable water vapor, so these figures apply to dry air only. The mole fractions sum to about 1, so the partial pressures sum to the total pressure (Dalton's law).
Frequently Asked Questions
What is a mole fraction? It is the number of moles of one gas divided by the total moles of all gases in the mixture. Because it is a ratio, it always falls between 0 and 1, and all the mole fractions in a mixture add up to 1.
Can I use pressure units other than atm? The formula itself is unit-independent — your partial pressure comes out in whatever unit you enter for total pressure. This calculator labels inputs in atmospheres (atm), so for consistent results, convert other units (kPa, mmHg, bar) to atm first.
What if the mole fractions of all gases don't add up to 1? They should. If they don't, you've likely made a measurement or rounding error. Each calculated partial pressure should sum back to the total pressure you entered.