Rhombus Area Calculator

Rhombus Area Calculator

#11 · Geometry AI Skill PRO
Rhombus
Worked stepsStep 2 of 2

Area A=12 d1d2A = \tfrac{1}{2}\,d_1 d_2

Download figure
Figure data
Diagonal 12.4
Diagonal 21.8
Area2.2
Side1.5
Rhombus in the Library: formulas and every calculator

Enter Calculation

Formula

Area=Diagonal 1×Diagonal 22\text{Area} = \frac{\text{Diagonal 1} \times \text{Diagonal 2}}{2}

Example

Area=2.4×1.82=2.16\text{Area} = \frac{2.4 \times 1.8}{2} = 2.16
Usage stats

Advertisement

Results

Rhombus Area
2.16
Input Diagonal 1 2.4
Input Diagonal 2 1.8
Calculated Perimeter 3
Calculated Side Length 1.5

Report an error on this page

What This Calculator Does

The Rhombus Area Calculator finds the area of a rhombus using the lengths of its two diagonals. A rhombus is a four-sided shape (quadrilateral) where all four sides are equal in length, and its two diagonals always cross each other at right angles. Because of this property, you only need the diagonals — not the angles or side length — to work out the area.

Behind the scenes, the tool also calculates the side length and the perimeter from the same two diagonals, so a single input gives you a complete picture of the shape.

Inputs You Provide

  • Diagonal 1 (d₁): the length of the first diagonal, measured corner to opposite corner.
  • Diagonal 2 (d₂): the length of the second diagonal, which crosses the first at 90°.

Both values should use the same unit (cm, m, inches, etc.). The area result is in those units squared.

The Formula Explained

The area of a rhombus is half the product of its diagonals:

Area = (d₁ × d₂) ÷ 2

This works because the diagonals split the rhombus into four right triangles. Each half-diagonal acts as the base and height of those triangles, and combining them gives this clean formula.

The calculator also derives the side and perimeter. Since the diagonals bisect each other at right angles, each side is the hypotenuse of a right triangle with legs d₁/2 and d₂/2:

  • Side = √((d₁/2)² + (d₂/2)²)
  • Perimeter = 4 × side (equivalently 2 × √((d₁/2)² + (d₂/2)²) per the tool's pairing)
Advertisement
Rhombus with its two diagonals d1 and d2 crossing at right angles in the center
A rhombus with diagonals d1 and d2, which intersect at right angles.

Worked Example

Suppose d₁ = 10 and d₂ = 8.

  • Area = (10 × 8) ÷ 2 = 40 square units
  • Side = √((10/2)² + (8/2)²) = √(25 + 16) = √41 ≈ 6.40 units
  • Perimeter = 4 × 6.40 ≈ 25.61 units
Advertisement
Rhombus inscribed in a rectangle of sides d1 and d2, showing area is half the rectangle
The rhombus fills half of a rectangle whose sides equal the diagonals, giving Area = d1 × d2 / 2.

More Worked Examples

Each example below works out three things from the two diagonals \(d_1\) and \(d_2\): the area, the side length and the perimeter. The diagonals of a rhombus cross at right angles and cut each other in half. That splits the rhombus into four identical right triangles with legs \(d_1/2\) and \(d_2/2\), and the side of the rhombus is the hypotenuse of each triangle. These are the formulas used:

$$A = \frac{d_1 \times d_2}{2}, \qquad s = \sqrt{\left(\tfrac{d_1}{2}\right)^2 + \left(\tfrac{d_2}{2}\right)^2}, \qquad P = 4s = 2\sqrt{d_1^2 + d_2^2}$$

Example 1: Decimal metric diagonals (d₁ = 2.4 m, d₂ = 1.8 m)

  1. Area: $$A = \frac{2.4 \times 1.8}{2} = \frac{4.32}{2} = 2.16\ \text{m}^2$$ The area is 2.16 m².
  2. Half-diagonals: \(2.4 / 2 = 1.2\) m and \(1.8 / 2 = 0.9\) m.
  3. Side: $$s = \sqrt{1.2^2 + 0.9^2} = \sqrt{1.44 + 0.81} = \sqrt{2.25} = 1.5\ \text{m}$$
  4. Perimeter: $$P = 4 \times 1.5 = 6.0\ \text{m}$$ Check: \(2\sqrt{2.4^2 + 1.8^2} = 2\sqrt{5.76 + 3.24} = 2\sqrt{9} = 6.0\) m.

Square metres come from multiplying metres by metres. If you enter the diagonals in centimetres (240 cm and 180 cm), the area comes out as 21,600 cm², which is the same 2.16 m².

Example 2: Equal diagonals (d₁ = d₂ = 6 in): a square

  1. Area: $$A = \frac{6 \times 6}{2} = \frac{36}{2} = 18\ \text{in}^2$$ The area is 18 in².
  2. Half-diagonals: \(6 / 2 = 3\) in for both.
  3. Side: $$s = \sqrt{3^2 + 3^2} = \sqrt{9 + 9} = \sqrt{18} \approx 4.24\ \text{in}$$
  4. Perimeter: $$P = 4 \times \sqrt{18} \approx 16.97\ \text{in}$$ Check: \(2\sqrt{6^2 + 6^2} = 2\sqrt{72} \approx 16.97\) in.

A rhombus with equal diagonals is a square. Here the side is \(6/\sqrt{2} \approx 4.24\) in, and side² gives \(18\) in², which matches the diagonal formula. Use the unrounded side (\(\sqrt{18}\)) when you work out the perimeter. Multiplying the rounded 4.24 by 4 gives 16.96, which is slightly off.

Example 3: Very unequal diagonals (d₁ = 24 cm, d₂ = 7 cm)

  1. Area: $$A = \frac{24 \times 7}{2} = \frac{168}{2} = 84\ \text{cm}^2$$
  2. Half-diagonals: \(24 / 2 = 12\) cm and \(7 / 2 = 3.5\) cm.
  3. Side: $$s = \sqrt{12^2 + 3.5^2} = \sqrt{144 + 12.25} = \sqrt{156.25} = 12.50\ \text{cm}$$
  4. Perimeter: $$P = 4 \times 12.5 = 50.0\ \text{cm}$$ Check: \(2\sqrt{24^2 + 7^2} = 2\sqrt{576 + 49} = 2\sqrt{625} = 2 \times 25 = 50.0\) cm.

This long, narrow rhombus has a much smaller area than its perimeter might suggest. A square with the same 50 cm perimeter would have 12.5 cm sides and an area of \(12.5^2 = 156.25\) cm². So when the side length stays fixed, the area shrinks as the shape gets flatter.

Example d₁ d₂ Area Side Perimeter
1 2.4 m 1.8 m 2.16 m² 1.5 m 6.0 m
2 6 in 6 in 18 in² ≈ 4.24 in ≈ 16.97 in
3 24 cm 7 cm 84 cm² 12.50 cm 50.0 cm

Frequently Asked Questions

Can I find the area without the diagonals? This calculator specifically uses the two diagonals. If you only know the side and an angle, you would use Area = side² × sin(angle) instead.

Do the diagonals have to be equal? No. If both diagonals are equal, the rhombus becomes a square, but the formula still applies.

What units does the answer use? Whatever unit you enter the diagonals in — the area comes out in that unit squared, and the side and perimeter in the same linear unit.

Last updated:

Most popular in Geometry

View all Geometry calculators