What the sheep feed ration calculator does
This calculator turns a sheep's daily nutrient requirement into practical feed quantities. You enter body weight, the production stage, how much of the ration should be concentrate (grain or pellets), and the dry matter and crude protein of your forage and concentrate. It returns the as-fed kilograms of each feed per sheep and for the whole flock over a feeding period. The intake percentages are general planning values, not a substitute for a ration balanced by a nutritionist or veterinarian.
How to use it
Select the stage: maintenance (about 2.0% of body weight as dry matter), late gestation (2.5%), early lactation (3.5%) or growing lamb (4.0%). Set the concentrate share of dry matter, then enter the dry matter and protein percentages from your feed tag or a hay test. Finally enter the number of sheep and days to get flock totals.
The formulas explained
Dry matter intake is body weight times the stage percentage:
$$\text{DMI} = \text{BW} \times \frac{p}{100}$$Each feed is then converted from dry matter to as-fed weight, where \(DM\%\) is the dry matter percentage of that feed:
$$\text{As-fed} = \frac{\text{DM}_{feed}}{DM\% / 100}$$Worked example
A 70 kg ewe in late gestation (\(p = 2.5\)) with 20% concentrate, both feeds at 88% dry matter:
$$\text{DMI} = 70 \times 0.025 = 1.75\,\text{kg}$$$$\text{Forage as-fed} = \frac{1.4}{0.88} = 1.59\,\text{kg}, \quad \text{Concentrate as-fed} = \frac{0.35}{0.88} = 0.40\,\text{kg}$$For 10 ewes over 30 days the flock needs about 477 kg of forage and 119 kg of concentrate. With forage at 12% and concentrate at 16% crude protein, the ration is 12.8% protein.
Typical Dry Matter Intake and Protein Targets by Production Stage
The table below lists general planning values for mature and growing sheep. They follow the approach of the NRC Nutrient Requirements of Small Ruminants (National Research Council, USA, 2007). Actual requirements depend on breed, body size, litter size, milk yield, growth rate, and weather, so treat these figures as starting points rather than exact requirements.
| Production stage | Dry matter intake (% of body weight) | Typical ration crude protein (% of DM) |
|---|---|---|
| Maintenance | 2.0 | about 9–10 |
| Late gestation | 2.5 | about 11–12 |
| Early lactation | 3.5 | about 13–14 |
| Growing lamb | 4.0 | about 14–16 |
Dry matter intake (DMI) is the feed weight with the water removed. For example, a 70 kg ewe at 2.5% of body weight needs \(70 \times 0.025 = 1.75\) kg of dry matter per day. Crude protein is shown here as a percentage of the total ration dry matter.
Typical Feed Dry Matter and Crude Protein Values
These are approximate typical ranges for common sheep feeds. Dry matter (DM) is given as a percentage of the as-fed weight. Crude protein (CP) is given on a dry matter basis, which is how feed tests usually report it; for grains and soybean meal the difference from an as-fed basis is small.
| Feed | Dry matter (%) | Crude protein (%) |
|---|---|---|
| Grass hay | about 88–90 | about 8–12 |
| Alfalfa hay | about 88–90 | about 16–20 |
| Corn grain | about 88 | about 8–9 |
| Oats | about 89 | about 11–13 |
| Barley | about 88 | about 11–12 |
| Soybean meal | about 89–90 | about 44–48 |
| Haylage / silage | about 35–50 | varies widely with crop and maturity |
Values vary with species, cutting date, maturity, weather, and storage. A laboratory hay or feed test is always preferred over book values, and you can enter the tested DM and CP into the calculator in place of these typical numbers.
Interpreting Your Ration Result
Compare ration CP with the stage target. The calculator reports the blended crude protein of the ration on a dry matter basis. Compare it with the ranges in the first table (for example, about 11–12% for late gestation). A result noticeably below the target suggests protein may be short; a protein source such as alfalfa or soybean meal could raise it. A result well above the target usually means protein is being fed in excess, which adds cost and is excreted as extra nitrogen rather than improving performance.
Worked example. A 70 kg ewe is fed at 2.5% of body weight with 20% concentrate. The forage is 90% DM and 10% CP; the concentrate is 88% DM and 12% CP.
- Dry matter intake: \(D = 70 \times 2.5/100 = 1.75\) kg
- Concentrate DM: \(D_C = 1.75 \times 0.20 = 0.35\) kg; forage DM: \(D_F = 1.75 - 0.35 = 1.40\) kg
- As-fed forage: \(F = 1.40 / 0.90 \approx 1.56\) kg; as-fed concentrate: \(C = 0.35 / 0.88 \approx 0.40\) kg
- Ration CP: \(\dfrac{1.40 \times 10 + 0.35 \times 12}{1.75} = \) 10.4%
At 10.4% CP, this ration is a little below the typical late-gestation range of about 11–12%, so a higher-protein forage or concentrate could be considered.
Typical forage-to-concentrate ratios. These are general patterns, not fixed rules. Maintenance rations are often mostly or entirely forage. Late gestation commonly adds a modest share of concentrate as intake capacity falls and fetal demand rises. Early lactation and fast-growing lambs usually use the highest concentrate shares, though forage should still make up a substantial portion to protect rumen health.
Why as-fed amounts exceed dry matter. Feeds contain water. Hay at 90% DM needs about 1.11 kg as-fed per 1 kg DM, and silage at 40% DM needs 2.5 kg as-fed per 1 kg DM. The calculator divides the dry matter by the DM fraction of each feed to give the weight you actually put in the feeder.
Limits of the estimate. This tool does not balance for energy (TDN or metabolizable energy), minerals and vitamins (calcium, phosphorus, selenium, copper, which is toxic to sheep at high levels), or fiber quality. It also does not include feed waste allowance, body condition, litter size, weather, or individual variation. Use it for planning quantities and checking protein only. For a balanced ration, consult a livestock nutritionist or veterinarian. This is general information, not professional advice.
FAQ
Why use dry matter? Feeds differ in moisture, so requirements are set on a dry basis and converted to what you weigh out.
Should I add a waste allowance? Yes, in practice many producers add 5-10% for refusals and spoilage; the calculator does not include it.
Does it cover minerals? No. Provide a sheep-specific mineral and always keep clean water available; avoid copper-heavy feeds designed for other species.