What Is an Equilateral Triangle?
An equilateral triangle is a triangle in which all three sides are equal in length and all three interior angles measure exactly 60°. Because of this perfect symmetry, its area can be found from a single measurement — the side length. This calculator instantly computes the area, perimeter, and height of an equilateral triangle once you enter one side.
How to Use This Calculator
Enter the side length (a) of your equilateral triangle in any unit (cm, m, inches, etc.) and the calculator returns the area in square units of that same unit. It also shows the perimeter (3a) and the height (altitude) for convenience. There is nothing else to configure — the geometry of an equilateral triangle is fully determined by one side.
The Formula Explained
The area of an equilateral triangle is given by:
$$A = \frac{\sqrt{3}}{4} \times a^{2}$$
This comes from the general triangle area \(\frac{1}{2} \times \text{base} \times \text{height}\). The base is the side \(a\), and the height of an equilateral triangle is \(\frac{\sqrt{3}}{2}\cdot a\). Multiplying \(\frac{1}{2} \times a \times \frac{\sqrt{3}}{2}\cdot a\) gives \(\frac{\sqrt{3}}{4}\cdot a^{2}\). The constant \(\frac{\sqrt{3}}{4}\) is approximately \(0.4330127\).
Worked Example
Suppose a triangle has a side length of 6 units. Then \(a^{2} = 36\), and $$A = 0.4330127 \times 36 \approx 15.59 \text{ square units}.$$ Its perimeter is \(3 \times 6 = 18\) units, and its height is \(\frac{\sqrt{3}}{2} \times 6 \approx 5.20\) units.
More Worked Examples
Each example uses the same three equilateral triangle formulas: area \(A = \frac{\sqrt{3}}{4} a^{2}\), perimeter \(P = 3a\), and height \(h = \frac{\sqrt{3}}{2} a\). The constants are \(\frac{\sqrt{3}}{4} \approx 0.4330127\) and \(\frac{\sqrt{3}}{2} \approx 0.8660254\). Lengths such as side, perimeter and height use linear units (cm, m, in). Area uses squared units (cm², m², in²).
Example 1: Decimal side, a = 2.5 cm
- Square the side: \(a^{2} = 2.5^{2} = 6.25\ \text{cm}^2\). This is a squared unit because a length is multiplied by a length.
- Multiply by the constant: $$A = 0.4330127 \times 6.25 = 2.7063294\ \text{cm}^2$$ Rounded, the area is 2.71 cm².
- Perimeter: \(P = 3 \times 2.5 = 7.5\ \text{cm}\). This is a length.
- Height: \(h = 0.8660254 \times 2.5 = 2.1650635\ \text{cm} \approx 2.17\ \text{cm}\). This is a length.
- Check: \(\tfrac{1}{2} \times \text{base} \times \text{height} = 0.5 \times 2.5 \times 2.1650635 = 2.7063294\ \text{cm}^2\). This matches step 2.
Example 2: Larger side, a = 10 m
- Square the side: \(a^{2} = 10^{2} = 100\ \text{m}^2\).
- Multiply by the constant: $$A = 0.4330127 \times 100 = 43.30127\ \text{m}^2$$ Rounded, the area is 43.30 m².
- Perimeter: \(P = 3 \times 10 = 30\ \text{m}\).
- Height: \(h = 0.8660254 \times 10 = 8.660254\ \text{m} \approx 8.66\ \text{m}\).
- Scaling note: the side is 4 times the 2.5-unit side in Example 1, so the area is \(4^{2} = 16\) times larger: \(16 \times 2.7063294 = 43.30127\). Area grows with the square of the side.
Example 3: Reverse case, known area A = 50 in²
Solve \(A = \frac{\sqrt{3}}{4} a^{2}\) for the side:
$$a = \sqrt{\frac{4A}{\sqrt{3}}}$$- Multiply the area by 4: \(4A = 4 \times 50 = 200\ \text{in}^2\).
- Divide by \(\sqrt{3}\): \(\frac{200}{1.7320508} = 115.47005\ \text{in}^2\). This value is \(a^{2}\), so it is still in squared units.
- Take the square root: \(a = \sqrt{115.47005} = 10.7457\ \text{in} \approx 10.75\ \text{in}\). The square root turns in² back into a length (in).
- Perimeter and height (optional): \(P = 3 \times 10.7457 = 32.237\ \text{in} \approx 32.24\ \text{in}\), and \(h = 0.8660254 \times 10.7457 = 9.306\ \text{in} \approx 9.31\ \text{in}\).
- Check: \(0.4330127 \times 10.7457^{2} = 0.4330127 \times 115.47 = 50.00\ \text{in}^2\). If you use the rounded side of 10.75 in, the area comes out to about 50.04 in². The small difference comes only from rounding.
Tip: keep full precision through the intermediate steps and round only the final answer. Rounding \(a^{2}\) or the constant too early introduces visible errors, especially for large triangles.
FAQ
Do all sides have to be equal? Yes. This formula only applies to equilateral triangles. For other triangles use Heron's formula or \(\frac{1}{2}\cdot\text{base}\cdot\text{height}\).
What units does the area use? Whatever unit you enter for the side, the area is in that unit squared (e.g. cm → cm²).
Why does √3 appear? It arises from the height of an equilateral triangle, which is derived using the Pythagorean theorem on half the triangle.