Cone Height Calculator

Cone Height Calculator

Popular AI Skill PRO
Cone
Worked stepsStep 4 of 4

Surface area A=πr (r+s)A = \pi r\,(r + s)

Download figure
Figure data
Radius3
Height21.22
Volume200
Base area28.27
Slant height21.43
Lateral area201.99
Total area230.26
Cone in the Library: formulas and every calculator

Enter Calculation

Results

Cone Height
21.22 units
Input Volume 200 cubic units
Input Radius 3 units
Calculated Height 21.22 units
Base Area 28.27 square units
Slant Height 21.43 units
Lateral Surface Area 201.99 square units
Total Surface Area 230.26 square units
Note: The height of a cone is the perpendicular distance from the center of the base to the apex (tip) of the cone.

Formula

h=3×Volumeπ×Radius2h = \frac{3 \times \text{Volume}}{\pi \times \text{Radius}^{2}}
Usage stats

Advertisement

Report an error on this page

What the Cone Height Calculator Does

This calculator works backwards from the standard cone volume formula. Instead of finding volume from dimensions, it takes the volume you already know along with the base radius and solves for the unknown height. It is handy whenever you have a known capacity (for example a container, funnel or 3D model) and need to figure out how tall the cone must be to hold it.

As a bonus, once the height is found the tool also reports the base area, slant height, lateral (side) surface area and total surface area — giving you a complete picture of the cone from just two inputs.

Cone showing base radius r and vertical height h
The height h is the perpendicular distance from the base center to the apex.

Inputs You Provide

  • Volume – the total capacity of the cone (in cubic units such as cm³, m³ or in³).
  • Radius – the radius of the circular base (in the matching linear unit, e.g. cm if volume is cm³).

Keep your units consistent: if volume is in cm³, the radius should be in cm so the resulting height comes out in cm.

The Formula Explained

A cone's volume is V = ⅓ π r² h. Rearranging that equation to isolate height gives the formula this calculator uses:

h = 3V / (π r²)

The extra results come from related geometry:

  • Base area = π r²
  • Slant height = √(r² + h²)
  • Lateral area = π r × slant height
  • Total surface area = lateral area + base area
Advertisement
Cone inside a cylinder of equal radius and height, cone is one third the volume
A cone's volume is one third of the enclosing cylinder, the basis for h = 3V/(pi r squared).

Worked Example

Suppose a cone has a volume of 100 cm³ and a base radius of 3 cm.

  • Height: h = (3 × 100) / (π × 3²) = 300 / 28.274 ≈ 10.61 cm
  • Base area = π × 9 ≈ 28.27 cm²
  • Slant height = √(3² + 10.61²) ≈ 11.03 cm
  • Lateral area = π × 3 × 11.03 ≈ 103.96 cm²
  • Total surface area ≈ 103.96 + 28.27 = 132.23 cm²

How Height Changes with Radius and Volume

The height of a cone is \(h = \frac{3V}{\pi r^{2}}\). Height is proportional to the volume and inversely proportional to the square of the radius. The tables below show both effects.

Fixed volume V = 100 cm³ (3V = 300)

Radius r (cm) Base area πr² (cm²) Height h (cm)
1 3.14 95.49
2 12.57 23.87
3 28.27 10.61
4 50.27 5.97
5 78.54 3.82

Fixed radius r = 3 cm (πr² ≈ 28.27 cm²)

Volume V (cm³) 3V Height h (cm)
50 150 5.31
100 300 10.61
200 600 21.22
300 900 31.83

Key patterns: doubling the radius cuts the height to one quarter (for example, 95.49 cm at r = 1 becomes 23.87 cm at r = 2), because the radius is squared. Doubling the volume at a fixed radius doubles the height (10.61 cm becomes 21.22 cm). Heights are rounded to 2 decimals.

Advertisement

Unit Conversions for Volume and Length

Convert your inputs to consistent units before calculating. If the radius is in centimeters, the volume must be in cm³, and the resulting height will be in centimeters.

Volume

Unit Equivalent
1 mL 1 cm³
1 L 1,000 cm³
1 m³ 1,000,000 cm³
1 in³ 16.387 cm³
1 ft³ 1,728 in³
1 US gallon 231 in³ = 3,785.41 cm³

Length

Unit Equivalent
1 in 2.54 cm
1 ft 30.48 cm
1 m 100 cm

Note: the cubic unit must match the length unit of the radius. A volume in liters with a radius in centimeters must first be converted (1 L = 1,000 cm³). A volume in cubic inches needs a radius in inches. Mixing units gives a wrong height. Gallons here are US gallons; the imperial gallon is a different size.

Frequently Asked Questions

Why does the radius get squared in the formula? Because the cone's base is a circle, its area scales with r². Doubling the radius quarters the required height for the same volume, so radius has a strong effect on the result.

What happens if I enter a radius of zero? The formula divides by π r², so a radius of 0 is undefined — a cone with no base can't have a measurable height. Always use a positive radius.

Can I use any units? Yes, as long as they match. Volume must be in cubic units of the same length unit as the radius, and the height will come back in that length unit.

Last updated:

Most popular in Geometry

View all Geometry calculators