What it is
The Crop Water Requirement Calculator estimates how much irrigation water a crop needs each day. It combines the reference evapotranspiration of the local climate with a crop coefficient for the current growth stage, then subtracts effective rainfall and accounts for irrigation efficiency and field size. This helps farmers, agronomists and irrigation planners schedule watering, size pumps and reduce waste.
The formula explained
Crop evapotranspiration is the reference rate scaled by the crop coefficient:
$$\text{ET}_c = \text{ET}_0 \times K_c$$Here \(\text{ET}_0\) = reference evapotranspiration in mm/day, and \(K_c\) = crop coefficient (about 0.4 at the initial stage, rising to roughly 1.15 at mid-season). The gross irrigation volume is:
$$V = \frac{\text{ET}_c - P_e}{E_a} \times A \times 10$$where \(P_e\) = effective rainfall (mm/day), \(E_a\) = irrigation efficiency as a fraction, and \(A\) = field area in hectares. The factor \(10\) converts a depth of 1 mm over 1 hectare into 10 cubic metres.
How to use it
Enter your reference evapotranspiration, choose the growth stage to set \(K_c\), then add effective rainfall, irrigation efficiency and field area. The calculator returns crop evapotranspiration, the net and gross irrigation depths, and the total daily water volume.
Worked example
With \(\text{ET}_0 = 5\) mm/day, mid-season \(K_c = 1.15\), rainfall \(1\) mm/day, efficiency \(70\%\) and area \(2\) ha:
$$\text{ET}_c = 5 \times 1.15 = 5.75\ \text{mm/day}$$$$V = \frac{5.75 - 1}{0.70} \times 2 \times 10 \approx 135.71\ \text{m}^3/\text{day}$$FAQ
What is a crop coefficient? It is a ratio that adjusts reference evapotranspiration to a specific crop and growth stage.
What is effective rainfall? The portion of rainfall actually stored in the root zone and available to the crop.
Why divide by efficiency? Some applied water is lost to runoff, evaporation and deep percolation, so more must be supplied than the crop consumes.