What this calculator does
The Fertilizer Spreader Calculator tells you how much fertilizer product to buy and apply to hit a target nutrient rate across a given area. Fertilizer rates are usually stated as pounds of a nutrient (often nitrogen) per 1000 square feet, but the bag only contains a percentage of that nutrient. This tool converts the nutrient target into a physical product weight and estimates how many bags you need.
How to use it
Enter your target nutrient rate in pounds per 1000 sq ft, the fertilizer analysis (the nutrient percentage printed on the bag, e.g. the first number in 20-5-10), the area to cover in square feet, and the bag size in pounds. The calculator returns product per 1000 sq ft, total product for the whole area, and the number of bags required.
The formula explained
First convert the nutrient rate into product using the analysis, then scale to your area:
$$P_{1000} = \frac{\text{Rate}}{\text{Analysis}/100}, \qquad P_{total} = P_{1000} \times \frac{\text{Area}}{1000}$$Here \(\text{Rate}\) = target nutrient in lb per 1000 sq ft, \(\text{Analysis}\) = nutrient percent in the bag, and \(\text{Area}\) = treated area in sq ft. Dividing the analysis by 100 turns the percentage into a decimal.
Worked example
Suppose you want \(1\) lb of nitrogen per 1000 sq ft using a 20% bag over 5000 sq ft:
$$P_{1000} = \frac{1}{20/100} = 5\,\text{lb}$$$$P_{total} = 5 \times \frac{5000}{1000} = 25\,\text{lb}$$With 50 lb bags that is \(25 \div 50 = 0.5\) of a bag.
FAQ
What is the fertilizer analysis? It is the N-P-K percentages on the bag. Use the number for the nutrient you are targeting (nitrogen is the first).
What spreader setting should I use? Settings are device-specific, so start below the manufacturer chart value, calibrate over a known area, and adjust until the applied weight matches this calculator.
Can I use it for any nutrient? Yes. Enter the target rate and the matching analysis percentage for that nutrient.