What Is a French Drain Calculator?
A French drain is a gravel-filled trench with a perforated pipe that redirects surface and groundwater away from a problem area such as a foundation, patio, or soggy lawn. This calculator estimates how much gravel you need to fill the trench, expressed in cubic yards — the unit landscaping suppliers use when selling and delivering aggregate.
How to Use It
Enter the trench length in feet, and the trench width and depth in inches. The calculator converts width and depth to feet, multiplies all three dimensions to get the trench volume in cubic feet, and divides by 27 to give cubic yards. It also estimates the approximate gravel weight in US tons so you can plan delivery.
The Formula Explained
Volume of a rectangular trench is length × width × depth. Because there are 27 cubic feet in one cubic yard, we divide by 27:
$$\text{Gravel (yd}^3) = \frac{\text{Length (ft)} \times \dfrac{\text{Width (in)}}{12} \times \dfrac{\text{Depth (in)}}{12}}{27}$$, where every dimension is in feet. Inches are converted by dividing by 12.
Worked Example
Suppose your trench is 50 ft long, 12 in (1 ft) wide, and 18 in (1.5 ft) deep. Volume = \(50 \times 1 \times 1.5 = 75 \text{ ft}^3\). Dividing by 27 gives ≈ 2.78 cubic yards of gravel. At roughly 1.4 tons per yard, that's about 3.89 US tons.
Gravel Needed for Common French Drain Sizes
The table below applies the calculator's formula to four typical trench sizes. Volume in cubic feet is length (ft) × width (ft) × depth (ft), where width and depth are converted from inches by dividing by 12. Cubic yards are cubic feet ÷ 27. Tonnage assumes about 1.4 US tons per cubic yard, a common rule of thumb for crushed or washed drainage stone (US short tons).
| Trench (length × width × depth) | Cubic feet | Cubic yards | Approx. US tons (at 1.4 tons/yd³) |
|---|---|---|---|
| 25 ft × 12 in × 18 in | 25 × 1 × 1.5 = 37.5 | 37.5 ÷ 27 ≈ 1.39 | ≈ 1.94 |
| 50 ft × 12 in × 18 in | 50 × 1 × 1.5 = 75 | 75 ÷ 27 ≈ 2.78 | ≈ 3.89 |
| 50 ft × 18 in × 24 in | 50 × 1.5 × 2 = 150 | 150 ÷ 27 ≈ 5.56 | ≈ 7.78 |
| 100 ft × 12 in × 24 in | 100 × 1 × 2 = 200 | 200 ÷ 27 ≈ 7.41 | ≈ 10.37 |
Example substitution for the second row: \(\frac{50 \times \frac{12}{12} \times \frac{18}{12}}{27} = \frac{75}{27} \approx 2.78\) cubic yards, and \(2.78 \times 1.4 \approx 3.89\) tons.
Notes:
- These figures fill the whole trench with gravel. A perforated pipe takes up some space, so the real amount may be slightly lower, but most people leave this as a small buffer for settling and waste.
- Gravel weight varies by stone type and moisture, commonly about 1.2–1.5 tons per cubic yard. Ask your supplier for the exact figure for your material.
- Suppliers in the US sell by the ton or by the cubic yard; many other countries use metric tonnes and cubic metres, so convert if you are ordering outside the US.
- Ordering about 5–10% extra is a common practice to cover compaction and uneven trench bottoms.
FAQ
Should I order extra gravel? Yes — order about 5–10% extra to allow for compaction and uneven trench walls.
What gravel size is best? Washed 3/4-inch (clean) stone is common because it drains well and resists clogging.
Does this include the pipe volume? No. The pipe displaces a small amount of gravel, so this estimate is slightly conservative, which is usually preferred.