Solid Geometry Shapes Calculator

Solid Geometry Shapes Calculator

Emerging AI Skill PRO

Enter Calculation

Formula

V=43πr3A=4πr2where{r=Radius (r)\begin{gathered} V = \frac{4}{3}\pi r^{3} \qquad A = 4\pi r^{2} \\[1.5em] \text{where}\quad \left\{ \begin{aligned} r &= \text{Radius (r)} \end{aligned} \right. \end{gathered}
Usage stats

Advertisement

Results

Volume
4.1888
cm³
Surface Area 12.5664 cm²
Great-Circle Circumference 6.2832 cm

Report an error on this page

What this calculator does

The Solid Geometry Shapes Calculator computes the volume, surface area and key extras (slant height, diagonals, circumference) of nine common three-dimensional solids: capsule, circular cone, circular cylinder, conical frustum, cube, hemisphere, square pyramid, rectangular prism (box) and sphere. It is pure mathematics, so the results are valid anywhere in the world with any consistent length unit.

Set of common 3D solids: sphere, cone, cylinder, cube, rectangular box, square pyramid, frustum and capsule
The solids this calculator handles: sphere, cone, cylinder, cube, box, pyramid, frustum and capsule.

How to use it

Pick a solid from the dropdown, then enter its dimensions in the same length unit (all millimetres, all centimetres, etc.). The unit selector is for labelling only — it does not rescale your numbers. Press calculate to see the volume in cubic units, surface areas in square units, and any shape-specific values such as slant height or the space diagonal. Every dimension must be greater than zero.

The formulas explained

Each solid uses its standard closed-form formula. A cone of base radius \(r\) and height \(h\) has volume $$V = \tfrac{1}{3}\pi r^{2} h$$ and slant height $$s = \sqrt{r^{2}+h^{2}},$$ so its total surface area is \(\pi r (r + s)\). A sphere of radius \(r\) has $$V = \tfrac{4}{3}\pi r^{3}, \quad A = 4\pi r^{2}.$$ The conical frustum (a cone with its tip cut off parallel to the base) uses $$V = \tfrac{1}{3}\pi h\left(r_1^{2}+r_2^{2}+r_1\cdot r_2\right);$$ when the top and bottom radii are equal it gracefully reduces to a cylinder.

Advertisement
Dimension labels on sphere, cone, cylinder and box for volume and surface area formulas
Key dimensions used in the formulas: radius \(r\), height \(h\), slant height \(l\) and box edges \(a\), \(b\), \(c\).

Worked example

Take a circular cone with base radius \(r = 3\) cm and height \(h = 4\) cm. The slant height is $$s = \sqrt{3^{2}+4^{2}} = \sqrt{25} = 5 \text{ cm}.$$ The volume is $$\tfrac{1}{3}\pi(9)(4) = 12\pi \approx 37.70 \text{ cm}^{3}.$$ The lateral surface area is $$\pi(3)(5) = 15\pi \approx 47.12 \text{ cm}^{2},$$ the base is \(\pi(9) \approx 28.27 \text{ cm}^{2}\), and the total surface area is $$\pi(3)(3+5) = 24\pi \approx 75.40 \text{ cm}^{2}.$$

Formula Cheat Sheet for All Nine Solids

All formulas use consistent length units: volume comes out in cubic units and surface area in square units. Total surface area includes every face, including flat bases.

Solid Required inputs Volume Total surface area Extras
Sphere radius \(r\) \(\frac{4}{3}\pi r^3\) \(4\pi r^2\) Diameter \(2r\)
Hemisphere radius \(r\) \(\frac{2}{3}\pi r^3\) \(3\pi r^2\) (curved \(2\pi r^2\) + flat base \(\pi r^2\)) Height equals \(r\)
Cone radius \(r\), height \(h\) \(\frac{1}{3}\pi r^2 h\) \(\pi r (r + l)\) Slant height \(l=\sqrt{r^2+h^2}\)
Cylinder radius \(r\), height \(h\) \(\pi r^2 h\) \(2\pi r (r + h)\) Space diagonal \(\sqrt{4r^2+h^2}\)
Cube side \(a\) \(a^3\) \(6a^2\) Space diagonal \(a\sqrt{3}\); face diagonal \(a\sqrt{2}\)
Box (rectangular prism) length \(a\), width \(b\), height \(c\) \(abc\) \(2(ab + bc + ca)\) Space diagonal \(\sqrt{a^2+b^2+c^2}\)
Square pyramid base edge \(a\), height \(h\) \(\frac{1}{3}a^2 h\) \(a^2 + 2a\,l\) Slant height \(l=\sqrt{h^2+(a/2)^2}\)
Conical frustum radii \(r_1\), \(r_2\), height \(h\) \(\frac{\pi h}{3}(r_1^2 + r_1 r_2 + r_2^2)\) \(\pi(r_1^2 + r_2^2) + \pi (r_1 + r_2)\,l\) Slant height \(l=\sqrt{(r_1-r_2)^2+h^2}\)
Capsule radius \(r\), cylinder-section height \(h\) \(\pi r^2 h + \frac{4}{3}\pi r^3\) \(2\pi r h + 4\pi r^2\) Overall length \(h + 2r\)

For the capsule, \(h\) is the height of the straight cylindrical part only, not the overall length. For the frustum, \(r_1\) and \(r_2\) are the bottom and top radii, and the order does not change the result.

Unit Conversions for Length, Area and Volume

Convert lengths first, then remember: an area factor is the length factor squared, and a volume factor is the length factor cubed. For example, since 1 in = 2.54 cm, 1 in² = 2.54² = 6.4516 cm² and 1 in³ = 2.54³ ≈ 16.387 cm³.

Type Conversion
Length 1 in = 2.54 cm
Length 1 ft = 30.48 cm
Length 1 m = 100 cm
Length 1 yd = 0.9144 m
Area 1 m² = 10,000 cm²
Area 1 ft² = 929.0304 cm²
Volume 1 m³ = 1,000,000 cm³ = 1,000 L
Volume 1 cm³ = 1 mL
Volume 1 ft³ ≈ 28.3168 L
Volume 1 in³ ≈ 16.387 cm³
Volume 1 US gallon ≈ 3.78541 L

Tip: do not convert a finished volume with the length factor. A result in ft³ must be multiplied by 28.3168 to get litres, not by 30.48.

Advertisement

Comparing Solids with the Same Dimensions

Take radius \(r=1\) for every round solid. The cylinder and cone both have height \(h=2r=2\). The cube has side \(a=2\), so it has the same width as the sphere's diameter.

Solid Dimensions Volume Total surface area
Sphere \(r=1\) \(\frac{4}{3}\pi \approx\) 4.1888 \(4\pi \approx 12.5664\)
Cylinder \(r=1,\ h=2\) \(2\pi \approx 6.2832\) \(6\pi \approx 18.8496\)
Cone \(r=1,\ h=2,\ l=\sqrt{5}\approx 2.2361\) \(\frac{2\pi}{3} \approx 2.0944\) \(\pi(1+\sqrt{5}) \approx 10.1664\)
Hemisphere \(r=1\) \(\frac{2\pi}{3} \approx 2.0944\) \(3\pi \approx 9.4248\)
Cube \(a=2\) \(2^3 = 8\) \(6\cdot 2^2 = 24\)

What the numbers show

  • 1 : 2 : 3 rule. With equal radius and \(h=2r\), cone : sphere : cylinder volumes are \(\frac{2\pi}{3} : \frac{4\pi}{3} : 2\pi = 1:2:3\), a result known since Archimedes.
  • Sphere is the most compact. For a given volume, the sphere has the smallest surface area. A cube holding the same volume as the unit sphere (4.1888) has side \(\approx 1.612\) and area \(\approx 15.59\), versus 12.57 for the sphere.
  • Hemisphere. It has exactly half the sphere's volume, but its surface area (\(3\pi\)) is 75% of the sphere's, because the flat base is added.

FAQ

Do all inputs need the same unit? Yes. Mixing units (some in cm, some in m) gives meaningless results. Convert everything to one unit first.

Why does my volume have so many decimals? The tool computes at full precision and rounds the display to four decimals. Internally nothing is lost.

What is the difference between lateral and total surface area? Lateral surface area is just the curved or slanted side(s); total surface area adds the flat base(s) on top.

Last updated:

Most popular in Geometry

View all Geometry calculators