380 calculators

  • Meters to Feet and Inches Calculator
    Convert meters to decimal feet and to feet plus inches, with inches rounded to the nearest 1/2, 1/4, 1/8, 1/16, 1/32 or 1/64 in lowest terms.
  • Paint Coverage and Cost Calculator
    Estimate paint needed for a wall, room, ceiling, or trim in gallons or liters, subtract doors and windows, and calculate total paint cost.
  • Feet and Inches Arithmetic Calculator
    Add, subtract, multiply, divide, scale, or convert lengths in feet and inches. Accepts fractions and mixed numbers; shows tape-measure fractions and decimals.
  • Tank Volume & Fill Calculator
    Calculate total tank capacity and partial fill volume for cylinder, rectangle, oval and capsule tanks. Results in US/Imperial gallons, liters, cubic meters and feet.
  • Topsoil Calculator
    Free topsoil calculator: find how much soil you need by volume (cubic yards, feet, meters, liters), weight in tons, number of bags and estimated cost.
  • Road Base Fill Volume, Weight and Cost Calculator
    Estimate road base / sub-base fill volume in cubic meters, yards and feet, plus material weight and cost, from length, width and depth with compaction and waste allowances.
  • Cubic Yards Calculator
    Calculate cubic yards, cubic feet and cubic meters of mulch, gravel, sand or concrete for any area and depth, with optional total material cost.
  • Cubic Feet Calculator (Volume & Cost for Multiple 3D Shapes)
    Calculate volume in cubic feet for boxes, rooms, tanks, cylinders, spheres and more. Convert to cubic inches, yards, meters, gallons, liters and total cost.
  • Mulch Calculator
    Free mulch calculator: find cubic yards, cubic feet and cubic meters of mulch needed for any bed shape and depth, plus bag count and total cost.
  • Sandbox Sand Calculator
    Calculate how much play sand you need to fill a sandbox. Enter length, width and depth to get volume, weight in pounds/tons and bag count.
  • Rise Over Run to Degrees Calculator
    Convert rise over run into a slope angle in degrees. Enter vertical rise and horizontal run to get the angle, percent grade, and ratio instantly.
  • Pyramid Block Calculator
    Calculate the total number of blocks needed to build a stepped square pyramid of n layers using the formula n(2n-1)(2n+1)/3.
  • Thermal Conductivity Unit Conversion Calculator
    Convert thermal conductivity between W/m·K, kW/m·K, J/cm·s, kcal/m·h, cal/cm·s, and BTU units instantly. Free, accurate physics unit converter.
  • Building Coverage Ratio (Kenpeiritsu) Calculator
    Calculate the building coverage ratio (kenpeiritsu), a Japan zoning measure: building footprint divided by site area, as a percent. Rounded up to 2 decimals.
  • Thermal Resistance Calculator
    Calculate the thermal resistance of a material layer from its thickness, thermal conductivity, and area using R = L / (k × A). Get R and conductance.
  • Wind Load Calculator
    Calculate the wind load force on a structure or surface from wind speed, area, drag coefficient and air density using F = ½·ρ·v²·Cd·A.
  • Breaker Size Calculator
    Calculate the minimum circuit breaker amperage from load power and voltage, with the 1.25 continuous-load safety factor (US NEC 80% rule).
  • Copper Wire Weight Calculator
    Calculate the weight of solid copper wire from its diameter and length. Uses copper density 8960 kg/m³ to return mass in kg and grams.
  • Bend Allowance Calculator
    Calculate sheet metal bend allowance from bend angle, inside radius, thickness and K-factor. Instant results in mm using the standard arc-length formula.
  • Angle of Repose Calculator
    Calculate the angle of repose of a granular material pile from its height and base radius using theta = arctan(h/r). Instant degrees and radians.
  • Sound Absorption Coefficient Calculator
    Calculate the average sound absorption coefficient of a room from each surface's area and α. Computes total absorption (sabins) and weighted average.
  • Reverberation Time Calculator
    Calculate room reverberation time (RT60) with the Sabine formula from volume, surface area, and average absorption coefficient. Fast, free acoustics tool.
  • Earthwork Soil Volume Conversion Calculator
    Convert earthwork soil volume between bank (in-situ), loose (excavated) and compacted states using swell factor L and compaction factor C, in cubic meters.
  • Square Feet of a Rectangle Calculator
    Calculate the area in square feet of a rectangle from its length and width, with instant conversions to square yards and square meters.