63 calculators

  • VSWR & Return Loss Calculator
    Convert between reflection coefficient, VSWR and return loss. Get mismatch loss and reflected power instantly for RF and antenna matching.
  • Packet Loss Percentage Calculator
    Calculate network packet loss percentage from packets sent and lost. Instantly see loss rate, packets received, and success rate for diagnosing connections.
  • Free Space Path Loss Calculator
    Calculate Free Space Path Loss (FSPL) in dB from distance (km) and frequency (MHz). Uses the standard 32.44 constant RF link-budget formula.
  • Network Latency from Distance Calculator
    Estimate one-way and round-trip network latency (RTT) from physical distance over fiber optic cable using the speed of light and a velocity factor.
  • IP Address to Binary Calculator
    Convert any IPv4 address to binary, a 32-bit decimal integer, and hexadecimal. Enter four octets (0-255) for instant dotted-binary output.
  • PoE Power Budget Calculator
    Calculate how many PoE devices your switch power budget supports. Pick a 802.3af/at/bt class or custom watts and see max devices, total draw and headroom.
  • IP Camera Bandwidth Calculator
    Calculate total network bandwidth (Mbps) and storage for IP/CCTV camera systems from bitrate per camera and number of cameras. Free online tool.
  • Signal-to-Noise Ratio Calculator
    Calculate signal-to-noise ratio (SNR) in decibels from signal and noise power using SNR_dB = 10·log10(P_signal/P_noise).
  • Concurrent Users Bandwidth Calculator
    Calculate the bandwidth available per user when a connection is shared. Enter total Mbps and the number of concurrent users to get per-user Mbps and Kbps.
  • MTBF / MTTR Availability Calculator
    Calculate network or system availability (uptime %) from MTBF and MTTR. See downtime percentage and estimated downtime hours per year instantly.
  • dBm to Watts Calculator
    Convert dBm to watts and milliwatts instantly. Enter a power level in dBm to get the equivalent power in W using P = 10^((dBm−30)/10).
  • Crosstalk Calculator
    Calculate crosstalk in decibels from source and coupled voltages using crosstalk_dB = 20·log10(V_coupled / V_source). Free and instant.
  • Watts to dBm Calculator
    Convert power in watts to dBm instantly. Free Watts to dBm calculator using dBm = 10·log10(W / 0.001) for RF, antenna, and signal power conversions.
  • Network & Broadcast Address Calculator
    Free IPv4 network and broadcast address calculator. Enter an IP and CIDR prefix to get the network, broadcast, subnet mask, host range and address count.
  • Mbps Download Time Calculator
    Estimate how long a file takes to download. Enter file size in MB and connection speed in Mbps to get the download time in seconds, minutes, and hours.
  • IP Address Range to CIDR Calculator
    Convert a start and end IPv4 address range into the smallest CIDR prefix block. Get the /prefix, block size, and address count instantly.
  • Signal Attenuation Calculator
    Calculate signal attenuation in decibels (dB) from input and output power using Attenuation = 10·log10(P_in/P_out). Fast, accurate power-loss tool.
  • Wildcard Mask Calculator
    Convert a subnet mask or CIDR prefix to its wildcard (inverse) mask. Each octet = 255 − mask octet. Perfect for Cisco ACLs and OSPF.
  • Website Bandwidth Calculator
    Estimate your website's monthly bandwidth in GB/TB from average page size, monthly pageviews and a redundancy/overhead percentage. Free hosting planner.
  • VoIP Bandwidth Calculator
    Calculate VoIP bandwidth per call and total for concurrent calls. Factors in codec bitrate, packetization interval and IP/UDP/RTP header overhead.
  • Subnet Mask / CIDR Calculator
    Calculate usable hosts, total addresses, and host bits for any CIDR prefix (/0 to /32). Fast IPv4 subnet calculator using 2^(32−prefix)−2.
  • IP Subnet & Host Count Calculator
    Calculate usable hosts, subnet mask, wildcard mask and total addresses from any IPv4 CIDR prefix (/0 to /32). Free subnetting tool.
  • Propagation Delay Calculator
    Calculate signal propagation delay over a cable or medium from distance and velocity factor. Get delay in nanoseconds and microseconds instantly.
  • Number of Subnets Calculator
    Calculate the number of subnets created when you subnet an IPv4 network. Enter the original and new prefix lengths to find subnets, borrowed bits, and hosts.