What Is Effective Nuclear Charge?
The effective nuclear charge (Zeff) is the net positive charge actually experienced by a particular electron in a multi-electron atom. While the nucleus carries a full charge equal to the atomic number Z, inner electrons partially "screen" or shield the outer electrons from that pull. This calculator computes Zeff using the simple relationship \(Z_{\text{eff}} = Z - S\), where S is the shielding (screening) constant.
How to Use the Calculator
Enter the atomic number Z of the element (for example, 11 for sodium) and the shielding constant S for the electron of interest. S is often estimated with Slater's rules. The calculator instantly returns Zeff, the effective charge felt by that electron. A higher Zeff means the electron is held more tightly, which correlates with smaller atomic radius and higher ionization energy.
The Formula Explained
The governing equation is $$Z_{\text{eff}} = Z - S.$$ Z is a whole number equal to the number of protons. S accounts for repulsion from other electrons: core electrons shield strongly, electrons in the same shell shield partially, and electrons in outer shells contribute essentially nothing. Slater's rules provide systematic values for S, so the precision of Zeff depends on the chosen shielding estimate.
Worked Example
Consider a 3s valence electron in sodium (Z = 11). Using Slater's rules, the shielding constant is approximately S = 8.8. Then $$Z_{\text{eff}} = 11 - 8.8 = 2.2.$$ So the valence electron in sodium feels an effective charge of about +2.2, far less than the full nuclear charge of +11.
Slater's Rules Shielding Contributions
Slater's rules estimate the shielding constant \(S\) used in \(Z_{\text{eff}} = Z - S\). First write the electron configuration in these groups, in order: (1s) (2s,2p) (3s,3p) (3d) (4s,4p) (4d) (4f) (5s,5p) and so on. Then add the contributions below for the electron you are studying. Electrons in groups farther out than the electron of interest contribute 0.
| Electron of interest | Other electrons in the same group | Electrons in the n−1 shell | Electrons in the n−2 shell or lower |
|---|---|---|---|
| ns or np | 0.35 each (0.30 each for 1s) | 0.85 each | 1.00 each |
| nd or nf | 0.35 each | 1.00 each for all electrons in groups to the left | |
Add all contributions to get \(S\), then subtract from the atomic number \(Z\). For example, for a 3s/3p electron in chlorine, the other 6 electrons in the 3s,3p group contribute 6 × 0.35 = 2.10, the eight n−1 (n = 2) electrons contribute 8 × 0.85 = 6.80, and the two 1s electrons contribute 2 × 1.00 = 2.00, giving \(S = 10.90\).
Z_eff Values for Period 2 and 3 Valence Electrons
The values below are Slater-rule estimates for an outer (valence) electron, calculated as \(Z_{\text{eff}} = Z - S\). For period 2, \(S = 0.35 \times (\text{other valence electrons}) + 0.85 \times 2\). For period 3, \(S = 0.35 \times (\text{other valence electrons}) + 0.85 \times 8 + 1.00 \times 2\).
| Element | Z | Slater S | Z_eff |
|---|---|---|---|
| Li | 3 | 1.70 | 1.30 |
| Be | 4 | 2.05 | 1.95 |
| B | 5 | 2.40 | 2.60 |
| C | 6 | 2.75 | 3.25 |
| N | 7 | 3.10 | 3.90 |
| O | 8 | 3.45 | 4.55 |
| F | 9 | 3.80 | 5.20 |
| Ne | 10 | 4.15 | 5.85 |
| Na | 11 | 8.80 | 2.20 |
| Mg | 12 | 9.15 | 2.85 |
| Al | 13 | 9.50 | 3.50 |
| Si | 14 | 9.85 | 4.15 |
| P | 15 | 10.20 | 4.80 |
| S | 16 | 10.55 | 5.45 |
| Cl | 17 | 10.90 | 6.10 |
| Ar | 18 | 11.25 | 6.75 |
Check for chlorine: \(Z_{\text{eff}} = 17 - 10.90 = 6.10\). These are approximate Slater-rule estimates, not exact quantum-mechanical values.
Interpreting Z_eff and Periodic Trends
- Across a period: Z_eff increases from left to right. Each step adds one proton, but the added electron enters the same shell and shields only about 0.35 of a unit, so Z_eff rises by about 0.65 per element in Slater's scheme (for example, 1.30 for Li to 5.85 for Ne).
- Down a group: Z_eff stays similar or increases only slightly, because the extra protons are largely offset by the additional inner shells of electrons. Under Slater's rules, Li (1.30) and Na (2.20) differ, but this comes from the n−2 electrons counted at 1.00, and the trend down a group is much weaker than across a period. More accurate calculations show only a modest change.
- Higher Z_eff means: a smaller atomic radius, a higher ionization energy and a greater electronegativity, because valence electrons are pulled more strongly toward the nucleus.
- Limits of Slater's rules: they are simple approximations that treat shielding as a sum of fixed constants. Values from Clementi–Raimondi, which are based on optimized atomic wavefunctions, differ from Slater's numbers, so treat Slater values as good for qualitative trends and for teaching rather than for precise work.
To use the calculator, enter the atomic number as z and the shielding constant as s; the result is \(Z_{\text{eff}} = Z - S\).
FAQ
Why is Z_eff less than Z? Because inner electrons partially block the attraction between the nucleus and an outer electron, reducing the charge that electron actually feels.
Where do I get the shielding constant S? Most commonly from Slater's rules, which assign screening contributions based on the electron's shell and subshell relative to the others.
Can Z_eff be negative? In practice no — S never exceeds Z for a real electron, so Zeff remains positive, though crude estimates can occasionally produce small values.