What this converter does
This tool converts between the frequency and the wavelength of a traveling wave. It works for any wave because it relies on one universal relationship between propagation speed, frequency and wavelength. The physics is identical everywhere, so no country or regional rules apply.
The formula
For any wave moving at speed v, the speed, frequency f and wavelength \(\lambda\) obey $$v = f \times \lambda$$ Rearranging gives the two conversions: $$f = \frac{v}{\lambda}$$ (frequency from wavelength) and $$\lambda = \frac{v}{f}$$ (wavelength from frequency). The speed depends on the medium: light in vacuum travels at exactly 299,792,458 m/s, sound in air is about 343 m/s near 20°C, and sound in seawater is roughly 1500 m/s.
How to use it
Pick a wave type to load its standard speed, or choose "Other" and type any speed in m/s. Enter a single value and choose its unit: if you pick a length unit (nm, µm, mm, m, km) the tool treats your number as a wavelength; if you pick a frequency unit (Hz, kHz, MHz, GHz, THz) it treats your number as a frequency. The calculator then returns both the wavelength in metres and the frequency in hertz.
Worked example
Choose Electromagnetic wave (\(v = 299{,}792{,}458\) m/s), enter 100 and select MHz. The frequency in SI units is $$100 \times 10^{6} = 1.0 \times 10^{8}\ \text{Hz}$$ The wavelength is $$\lambda = \frac{299{,}792{,}458}{10^{8}} \approx 2.998\ \text{m}$$ which matches the roughly 3 m wavelength of a 100 MHz FM radio signal.
Typical Frequencies and Wavelengths by Band
Wavelength follows from \(\lambda = v/f\). For electromagnetic waves in vacuum (or air, to a very close approximation) \(v = c \approx 3.00\times10^{8}\) m/s. Band boundaries are conventional and differ slightly between standards bodies, so the ranges below are approximate.
| Band / source | Approx. frequency | Approx. wavelength |
|---|---|---|
| ELF/VLF radio | 3 Hz – 30 kHz | 100,000 km – 10 km |
| AM broadcast (medium wave) | 0.5 – 1.6 MHz | ≈ 600 m – 187 m |
| FM broadcast | 88 – 108 MHz | ≈ 3.4 m – 2.8 m |
| Microwave (general) | 300 MHz – 300 GHz | 1 m – 1 mm |
| Wi-Fi 2.4 GHz | 2.4 GHz | ≈ 12.5 cm |
| Wi-Fi 5 GHz | 5 GHz | ≈ 6.0 cm |
| Infrared | ≈ 0.3 THz – 430 THz | ≈ 1 mm – 700 nm |
| Visible light | ≈ 430 – 750 THz | ≈ 700 – 400 nm |
| Ultraviolet | ≈ 750 THz – 30 PHz | ≈ 400 – 10 nm |
| X-rays | ≈ 30 PHz – 30 EHz | ≈ 10 nm – 0.01 nm |
| Audible sound in air (343 m/s) | 20 Hz – 20 kHz | ≈ 17 m – 1.7 cm |
Example for sound: \(\lambda = 343 \text{ m/s} \div 20 \text{ Hz} = \)17.15 m, and at 20 kHz, \(343 \div 20{,}000 = 0.01715\) m ≈ 1.7 cm.
Wave Speeds Used by the Calculator
| Medium | Speed \(v\) | Notes |
|---|---|---|
| Light / EM waves in vacuum | 299,792,458 m/s | Exact by definition of the metre |
| Sound in air at 20 °C | ≈ 343 m/s | ≈ 331 m/s at 0 °C |
| Sound in seawater | ≈ 1500 m/s | Typical value; varies with conditions |
The speed of sound depends on temperature, pressure and, in water, salinity (and depth). The values above are typical, so use the custom speed option when you need a specific condition.
Light is slower in a material medium: \(v = c/n\), where \(n\) is the refractive index. Typical values are about 1.33 for water and about 1.5 for common glass, so light in glass travels at roughly \(3.0\times10^{8}/1.5 \approx 2.0\times10^{8}\) m/s. The frequency stays the same when a wave enters a new medium, while the wavelength changes in proportion to the speed.
Unit Prefix Conversion Table
| Quantity | Unit | SI factor |
|---|---|---|
| Length | nanometre (nm) | 1 nm = 10-9 m |
| Length | micrometre (µm) | 1 µm = 10-6 m |
| Length | millimetre (mm) | 1 mm = 10-3 m |
| Length | metre (m) | 1 m = 1 m |
| Length | kilometre (km) | 1 km = 103 m |
| Frequency | hertz (Hz) | 1 Hz = 1 s-1 |
| Frequency | kilohertz (kHz) | 1 kHz = 103 Hz |
| Frequency | megahertz (MHz) | 1 MHz = 106 Hz |
| Frequency | gigahertz (GHz) | 1 GHz = 109 Hz |
| Frequency | terahertz (THz) | 1 THz = 1012 Hz |
Convert the input to base units (m or Hz) first, apply \(\lambda = v/f\) or \(f = v/\lambda\), then convert back to the unit you want. For example, 500 nm = \(500\times10^{-9}\) m = \(5\times10^{-7}\) m.
FAQ
Why does the answer change with wave type? Because frequency and wavelength are linked through the wave's speed; the same frequency gives a much shorter wavelength for slow sound waves than for fast light waves.
Can I enter my own speed? Yes. Select "Other (manual entry)" and type any propagation speed greater than zero in m/s.
Are the preset speeds exact? The speed of light is exact by definition. Sound speeds are standard approximations that vary with temperature, pressure and salinity.