What is the Tree Volume Calculator?
This tool estimates the merchantable stem volume of a standing tree from three easy measurements: its diameter at breast height (DBH), its total height, and a form factor that accounts for stem taper. It is used by foresters, arborists, woodlot owners and students to gauge timber yield, carbon stock and growth.
How to use it
Measure DBH with a diameter tape at 1.3 m above ground and enter it in centimetres. Enter total tree height in metres (use a clinometer or hypsometer). Then enter a form factor: roughly \(0.5\) for many broadleaves, \(0.4\)–\(0.45\) for tapering conifers. The calculator converts DBH to metres, computes basal area and multiplies by height and the form factor.
The formula explained
The stem is modelled as a tapering cylinder. The display volume is:
$$V = \frac{\pi D^2}{4} \times H \times f$$
where \(D\) = stem diameter in metres, \(H\) = height in metres, and \(f\) = form factor (dimensionless). The term \(\frac{\pi D^2}{4}\) is the basal area \(A\). A perfect cylinder has \(f = 1\); real stems taper, so \(f < 1\).
Worked example
For DBH = 40 cm, height = 20 m, form factor = 0.5:
$$D = 0.40\,\text{m},\quad A = \frac{\pi (0.40)^2}{4} = 0.1257\,\text{m}^2$$
$$V = 0.1257 \times 20 \times 0.5 = 1.257\,\text{m}^3$$
Typical Form Factors by Species Group
The form factor \(f\) is the ratio of the real stem volume to the volume of a cylinder with the same breast-height basal area and the same height: \(f = \dfrac{V}{g \times H}\), where \(g = \dfrac{\pi}{4}D^2\). A perfect cylinder has \(f = 1\), and real stems taper, so \(f\) is well below 1. The values below are approximate breast-height form factors for common species groups.
| Species group | Approx. form factor (f) |
|---|---|
| Spruce / fir | 0.45 – 0.50 |
| Pine | 0.42 – 0.48 |
| Larch | 0.42 – 0.47 |
| Douglas-fir | 0.40 – 0.45 |
| Beech | 0.50 – 0.55 |
| Oak | 0.50 – 0.55 |
| Birch | 0.45 – 0.50 |
| Poplar | 0.45 – 0.50 |
Note: these are general ranges only. The real form factor varies with tree age, site quality, stand density, crown shape and height (taller, slenderer trees usually have lower values). For forest inventory, timber sales or any formal work, use local species-specific volume or form-factor tables for your region.
Volume Comparison for Different Tree Sizes
Each row uses \(V = \dfrac{\pi}{4}\left(\dfrac{\text{DBH}}{100}\right)^2 \times H \times f\), with DBH in cm and H in m.
| DBH (cm) | Height (m) | Form factor | Basal area (m²) | Volume (m³) |
|---|---|---|---|---|
| 20 | 15 | 0.50 | 0.0314 | 0.236 |
| 30 | 18 | 0.48 | 0.0707 | 0.611 |
| 40 | 20 | 0.47 | 0.1257 | 1.181 |
| 60 | 28 | 0.45 | 0.2827 | 3.563 |
Worked check for the 30 cm tree: \(\dfrac{\pi}{4} \times 0.30^2 = 0.0707\) m², then \(0.0707 \times 18 \times 0.48 \approx 0.611\) m³.
Note: volume depends on the square of the diameter, so at the same height and form factor, doubling DBH quadruples the volume (for example, 20 cm to 40 cm quadruples the basal area from 0.0314 to 0.1257 m²). Larger trees are also usually taller, so volume grows even faster across a real stand.
Volume and Unit Conversions
| Quantity | Conversion |
|---|---|
| Volume | 1 m³ = 35.315 ft³ |
| Volume | 1 ft³ = 0.02832 m³ |
| Diameter | 1 in = 2.54 cm |
| Diameter | 1 cm = 0.3937 in |
| Height | 1 m = 3.281 ft |
| Firewood (stacked) | 1 cord (128 ft³ stacked) ≈ 3.624 m³ of stacked volume |
Cord caution: a cord is a measure of stacked wood including air gaps, so it is not the same as solid wood volume. The solid wood in a cord is considerably less than 3.624 m³, and you cannot convert solid stem volume to cords by this figure alone.
Using inches: this calculator expects DBH in centimetres and height in metres. Convert DBH from inches first by multiplying by 2.54. For example, a 16 in tree is \(16 \times 2.54 = 40.64\) cm. Convert heights in feet to metres by dividing by 3.281. The result is in m³; multiply by 35.315 for ft³.
FAQ
What is a form factor? It is the ratio of actual stem volume to the volume of a cylinder with the same DBH and height, correcting for taper.
Does this include branches? No — it estimates main stem (bole) volume only, not crown or branch wood.
How accurate is it? It is a quick field estimate. For precise inventory use species-specific volume tables or taper equations.