Yarn Count Calculator

Yarn Count Calculator

Leading AI Skill PRO

Enter Calculation

Formula

Tex=1000×WgLmNe=590.5412474TexNm=1000TexDenier=9Texdtex=10Texwhere{Wg=Sample Weight×Weight Unit to gLm=Sample Length×Length Unit to m\begin{gathered} \text{Tex} = 1000 \times \dfrac{W_{g}}{L_{m}} \qquad \text{Ne} = \dfrac{590.5412474}{\text{Tex}} \\[0.6em] \text{Nm} = \dfrac{1000}{\text{Tex}} \qquad \text{Denier} = 9\,\text{Tex} \qquad \text{dtex} = 10\,\text{Tex} \\[1.5em] \text{where}\quad \left\{ \begin{aligned} W_{g} &= \text{Sample Weight} \times \text{Weight Unit to g} \\ L_{m} &= \text{Sample Length} \times \text{Length Unit to m} \end{aligned} \right. \end{gathered}
Show calculation steps (1)
  1. Conversion from a Known Yarn Count

    Tex={590.5412474Cif Ne1000Cif NmCif TexC10if dtexC9if Denierwhere{C=Known Count Valuesystem=Count System\begin{gathered} \text{Tex} = \begin{cases} \dfrac{590.5412474}{C} & \text{if Ne} \\[0.4em] \dfrac{1000}{C} & \text{if Nm} \\[0.4em] C & \text{if Tex} \\[0.4em] \dfrac{C}{10} & \text{if dtex} \\[0.4em] \dfrac{C}{9} & \text{if Denier} \end{cases} \\[1.5em] \text{where}\quad \left\{ \begin{aligned} C &= \text{Known Count Value} \\ \text{system} &= \text{Count System} \end{aligned} \right. \end{gathered}

    C = Known Count Value; the chosen Count System sets how C maps to Tex, then Ne = 590.5412474/Tex, Nm = 1000/Tex, Denier = 9 Tex, dtex = 10 Tex

Usage stats

Advertisement

Results

Linear Density (Tex)
20
grams per 1,000 metres
Ne - English cotton count 29.53
Nm - metric count 50
Denier (g / 9,000 m) 180
dtex (g / 10,000 m) 200
Yards per pound 24,803

Report an error on this page

What yarn count measures

Yarn count expresses how fine or coarse a yarn is by relating its length to its weight. Two families exist. Direct systems - Tex, decitex and denier - state the mass of a fixed length, so a higher number means a thicker yarn. Indirect systems - the English cotton count \(\text{Ne}\) and the metric count \(\text{Nm}\) - state how much length you get per unit of mass, so a higher number means a finer yarn. Spinners, weavers, knitters and handspinners all need to move between these systems, which is exactly what this calculator does.

Three yarn strands of equal length but different thickness, each on a balance scale showing heavier weight for thicker yarn
Direct systems (Tex, dtex, denier) weigh a fixed length, so thicker yarn gets a higher number.

How to use it

Choose Length and weight of a sample if you have wound off a skein and weighed it: enter the length and weight with their units and the tool normalises them to metres and grams. Choose Convert a known yarn count if the cone label already says 30 Ne or 150 denier, and pick the matching system. Either way you get the yarn expressed in all five counts plus yards per pound.

Advertisement
A yarn skein measured for length on a reel and then weighed on a digital scale
To find yarn count from a sample, measure a known length and weigh it accurately.

The formula explained

Everything is anchored on Tex, the mass in grams of 1000 metres:

$$\text{Tex} = \frac{W_g}{L_m} \times 1000$$

with \(W_g\) = sample weight in grams and \(L_m\) = sample length in metres. The other counts follow directly: \(\text{Nm} = 1000/\text{Tex}\), \(\text{Den} = 9 \times \text{Tex}\) and \(\text{dtex} = 10 \times \text{Tex}\). The cotton count constant comes from its definition of one hank as 840 yards per pound:

$$\text{Ne} = \frac{453.59237}{768.096} \times \text{Nm} = \frac{590.54}{\text{Tex}}$$
Equal weights of thick and thin yarn, with the thin yarn much longer, contrasting direct and indirect count systems
Indirect systems (Ne, Nm) measure length per fixed weight, so finer yarn gets a higher count, the opposite of Tex and denier.

Worked example

You wind a 1000 m skein and it weighs 20 g:

$$\text{Tex} = \frac{20}{1000} \times 1000 = 20$$ $$\text{Nm} = \frac{1000}{20} = 50, \qquad \text{Ne} = \frac{590.54}{20} = 29.53$$ $$\text{Den} = 9 \times 20 = 180, \qquad \text{dtex} = 200$$

So a 20 Tex yarn is roughly a 30s cotton count yarn - a typical fine shirting weft.

Advertisement

Yarn Count Conversion Table

Yarn fineness is quoted in two opposite families of units. Direct systems state mass per unit length, so a bigger number means a thicker yarn: tex (grams per 1 000 m, the SI-based system defined in ISO 1144), decitex (grams per 10 000 m) and denier (grams per 9 000 m). Indirect systems state length per unit mass, so a bigger number means a finer yarn: the metric count \(\text{Nm}\) (metres per gram, equivalently km per kg) and the English cotton count \(\text{Ne}\), which is the number of 840-yard hanks contained in one pound. Because Ne is built on the imperial pound and yard, its conversion constant is

$$\text{Ne} = \frac{453.59237\ \text{g/lb}}{840\ \text{yd} \times 0.9144\ \text{m/yd}} \times \frac{1000}{\text{Tex}} = \frac{590.5412474}{\text{Tex}}$$

Conversion formula matrix

Read a row as the known system and a column as the system wanted. "yd/lb" is yards per pound, the raw length-per-pound figure behind Ne.

From ↓   To → Tex dtex Denier Nm Ne yd/lb
Tex — \(10\,\text{Tex}\) \(9\,\text{Tex}\) \(\dfrac{1000}{\text{Tex}}\) \(\dfrac{590.5412}{\text{Tex}}\) \(\dfrac{496055}{\text{Tex}}\)
dtex \(\dfrac{\text{dtex}}{10}\) — \(0.9\,\text{dtex}\) \(\dfrac{10000}{\text{dtex}}\) \(\dfrac{5905.412}{\text{dtex}}\) \(\dfrac{4960550}{\text{dtex}}\)
Denier \(\dfrac{\text{Den}}{9}\) \(1.1111\,\text{Den}\) — \(\dfrac{9000}{\text{Den}}\) \(\dfrac{5314.871}{\text{Den}}\) \(\dfrac{4464495}{\text{Den}}\)
Nm \(\dfrac{1000}{\text{Nm}}\) \(\dfrac{10000}{\text{Nm}}\) \(\dfrac{9000}{\text{Nm}}\) — \(0.590541\,\text{Nm}\) \(496.055\,\text{Nm}\)
Ne \(\dfrac{590.5412}{\text{Ne}}\) \(\dfrac{5905.412}{\text{Ne}}\) \(\dfrac{5314.871}{\text{Ne}}\) \(1.69337\,\text{Ne}\) — \(840\,\text{Ne}\)
yd/lb \(\dfrac{496055}{\text{yd/lb}}\) \(\dfrac{4960550}{\text{yd/lb}}\) \(\dfrac{4464495}{\text{yd/lb}}\) \(\dfrac{\text{yd/lb}}{496.055}\) \(\dfrac{\text{yd/lb}}{840}\) —

Two shortcuts worth memorising: between the direct systems the ratios are fixed (\(\text{dtex} = 10\,\text{Tex}\), \(\text{Den} = 9\,\text{Tex}\)), and between the two indirect systems \(\text{Ne} \approx 0.59\,\text{Nm}\), i.e. a metric count is roughly 1.69 times the cotton count of the same yarn.

Equivalence table for common counts

All values below are computed from the exact constants above and rounded to 2 decimals (yards per pound to the nearest yard). For example, a 1 000 m sample weighing 20 g gives Tex 20, which is 200 dtex, 180 denier, Nm 50 and Ne 29.53.

Tex (g/km) dtex Denier Nm Ne yd/lb
10 100 90 100.00 59.05 49,606
15 150 135 66.67 39.37 33,070
20 200 180 50.00 29.53 24,803
30 300 270 33.33 19.68 16,535
50 500 450 20.00 11.81 9,921
75 750 675 13.33 7.87 6,614
100 1,000 900 10.00 5.91 4,961
200 2,000 1,800 5.00 2.95 2,480
500 5,000 4,500 2.00 1.18 992

Notes on reading counts in practice: a count written as Ne 30/2 or Nm 48/2 normally means two singles of that count twisted together, so the resultant yarn is about twice as heavy (Ne 30/2 ≈ Ne 15 resultant ≈ Tex 39.4 plus a few percent for twist contraction). Direct counts are additive instead: two 20 tex singles plied give roughly 40 tex. Conversions are purely arithmetic and assume the same yarn — they do not account for twist take-up, sizing, finish or moisture regain, all of which change a measured weight and therefore the measured count.

FAQ

Is a higher yarn count thicker or thinner?

In Ne and Nm a higher number is thinner. In Tex, dtex and denier a higher number is thicker.

How accurate does my sample need to be?

Weigh at least a few grams on a scale reading to 0.01 g and measure the length on a wrap reel. Short, light samples magnify weighing error.

What about plied yarns?

This tool returns the resultant count of whatever you measured. For a 2-ply made of two 30 Ne singles, the resultant is about 15 Ne, which is what you get if you weigh the finished plied yarn.

Last updated:

Most popular in Industry-Specific

View all Industry-Specific calculators