380 calculators

  • Mulch Calculator
    Free mulch calculator: find cubic yards, cubic feet and cubic meters of mulch needed for any bed shape and depth, plus bag count and total cost.
  • Square Yards Calculator
    Calculate area in square yards from length and width in feet. Free square yards calculator for flooring, carpet, and landscaping projects.
  • Septic Tank Volume Calculator
    Calculate septic tank capacity in US gallons from length, width and liquid depth in feet. Free rectangular tank volume calculator with liters too.
  • Concrete Stairs Calculator
    Calculate concrete volume for stairs from step count, rise, run, width and platform. Get cubic meters, cubic yards, weight and premix bag estimates.
  • Concrete Cylinder Calculator
    Calculate concrete volume for cylindrical columns, piers, and footings. Get cubic yards, cubic feet, weight, and 60 lb bag count from diameter and height.
  • Miter Angle Calculator
    Calculate the miter angle for any corner. Enter the corner angle and get the exact cut angle for each board plus the miter saw setting.
  • Room Area Calculator (Square Feet & Square Meters)
    Calculate room area from length and width in feet or meters. Instantly convert between square feet and square meters for any room.
  • Tile Grout Calculator
    Estimate how much tile grout you need in litres and kilograms from tile size, joint width, thickness, area and grout density. Free, accurate and easy.
  • Ladder Angle Calculator
    Calculate the angle of a ladder against a wall from its height and base distance. Check the safe 75-degree (4-to-1) setup and required ladder length.
  • Tile Quantity Calculator
    Calculate how many tiles and boxes you need for a floor or wall. Enter room and tile size plus waste % to get exact tile counts and boxes to buy.
  • Pipe Slope Calculator
    Calculate the required slope, grade and total fall of a drainage or sewer pipe over a given run. Supports percent, 1:N ratio and inch-per-foot slope.
  • Countersink Depth Calculator
    Calculate the plunge depth (Z) for a countersink from the desired countersink diameter, hole diameter and included angle (82°, 90°, 100° and more).
  • Duct Sizing Calculator
    Free duct sizing calculator: enter airflow (CFM) and design velocity (FPM) to find the required round duct diameter and cross-sectional area instantly.
  • Fabric Calculator
    Calculate how many yards of fabric you need from the total area and the usable fabric width. Free, fast estimator for sewing and upholstery projects.
  • Tank Volume Calculator
    Calculate the volume and capacity of horizontal or vertical cylindrical tanks in cubic meters, liters, and US gallons from diameter and length.
  • Inches to Fraction Calculator
    Convert decimal inches to the nearest fraction (1/2 to 1/64). Free inches to fraction calculator for woodworking, machining and tape-measure readings.
  • Concrete Block Fill Calculator
    Calculate how much concrete you need to fill the voids in concrete blocks (CMU). Enter block count and void volume to get cubic feet and cubic yards.
  • Scale Calculator
    Convert between real size and scaled size using any scale ratio (1:N). Perfect for model building, maps, drawings and architecture.
  • Simply Supported Beam Deflection Calculator (Center Point Load)
    Calculate the maximum mid-span deflection of a simply supported beam under a central point load using δ = PL³ / (48EI). Free engineering tool.
  • Thermal Resistance Calculator
    Calculate the thermal resistance of a material layer from its thickness, thermal conductivity, and area using R = L / (k × A). Get R and conductance.
  • Feet and Inches Fraction Calculator
    Convert feet, inches and a fraction into total inches and total feet, then back into a clean feet-inches-fraction reading rounded to 1/2 to 1/32.
  • Drainage Slope Calculator
    Calculate the fall (drop) a drainage pipe or channel needs over a horizontal run from the slope percent, plus the slope ratio and angle for proper water flow.
  • Fence Calculator
    Free fence calculator: enter your fence length and post spacing to estimate the number of posts, sections (panels), and rails needed for your project.
  • Fill Dirt Calculator
    Calculate how much fill dirt you need in cubic yards and tons. Enter length, width and depth to estimate volume, weight and cost for your project.