Mixture Problem Calculator

Mixture Problem Calculator

Popular AI Skill PRO

Enter Calculation

%
%
%
Add a solution
Any unit (mL, L, fl oz) for the amounts, the same for every solution.

Formula

Cf=C1·V1+C2·V2V1+V2C_f = \frac{{{\text{C}_1}} \cdot {{\text{V}_1}} + {{\text{C}_2}} \cdot {{\text{V}_2}}}{{{\text{V}_1}} + {{\text{V}_2}}}
Usage stats

Advertisement

Results

Final concentration
40
% w/v
Total amount 400
Pure solute 160

Report an error on this page

What is the Mixture Problem Calculator?

This calculator solves classic mixture (or "alligation") problems where two solutions of different concentrations are blended together. Given the volume and concentration of each solution, it computes the concentration of the resulting mixture, the total volume, and the total amount of pure solute. It is useful for chemistry labs, pharmacology dosing, agriculture spray mixing, cooking, and any situation where you combine liquids of differing strengths.

How to use it

Enter the volume of Solution 1 and its concentration as a percentage, then do the same for Solution 2. The units of volume can be anything (mL, L, gallons) as long as both volumes use the same unit. Concentrations are entered as percentages. Click calculate to see the blended concentration.

Bar showing solute amounts from two sources adding up to total solute over total volume
Total solute equals c1·V1 plus c2·V2, divided by the combined volume.

The formula explained

The amount of pure solute is conserved when mixing. The solute from each solution is its concentration times its volume. Adding the two and dividing by the total volume gives the final concentration:

$$c_f = \frac{c_1 \cdot V_1 + c_2 \cdot V_2}{V_1 + V_2}$$

If instead you know a target final concentration and want to find how much of Solution 1 to add, rearrange to \(x = \frac{V_2(c_2 - c_f)}{c_f - c_1}\).

Advertisement

Worked example

Mix 100 mL of a 10% solution with 300 mL of a 50% solution. Pure solute = \((10\times100 + 50\times300)/100 = (1000 + 15000)/100 = 160\) units. Total volume = 400 mL. Final concentration = $$\frac{10 \cdot 100 + 50 \cdot 300}{400} = \frac{16000}{400} = 40\%.$$ So the blend is 40% concentration with 160 units of pure solute.

Two beakers of different shaded solutions combining into a third beaker with intermediate shade
Blending two solutions of concentrations c1 and c2 to get a final concentration c_f.

Blending Scenarios Compared

Each row uses the weighted-average formula \(C_f = \frac{c_1 V_1 + c_2 V_2}{V_1 + V_2}\). Concentrations are percent by volume and volumes are in mL, so the solute is in mL of pure solute. Simple volume addition is assumed. In every row the final concentration lies between c1 and c2.

Scenario V1 (mL) c1 (%) V2 (mL) c2 (%) Total volume (mL) Total solute (mL) Final concentration (%)
Equal volumes of 10% and 50% 100 10 100 50 200 10 + 50 = 60 30
1:3 ratio of 10% to 50% 1000 10 3000 50 4000 100 + 1500 = 1600 40
20% stock diluted with equal water 500 20 500 0 1000 100 + 0 = 100 10
One volume much larger 900 10 100 50 1000 90 + 50 = 140 14
Unequal volumes of 12% and 32% 2000 12 3000 32 5000 240 + 960 = 1200 24

Notice two patterns. The result sits closer to the concentration of the solution you use more of. In the 900 mL / 100 mL case, the 10% solution dominates, so the result (14%) is near 10% rather than the midpoint of 30%.

More Worked Examples

Example 1: Diluting a stock solution with pure water

How much pure water (0%) must be added to 5 L of a 40% solution to get a 25% solution?

  1. Let x be the litres of water. Water has c2 = 0, so it adds volume but no solute.
  2. Set up the weighted average: \(25 = \frac{40 \cdot 5 + 0 \cdot x}{5 + x}\).
  3. Multiply both sides by (5 + x): \(25(5 + x) = 200\), so \(125 + 25x = 200\).
  4. Solve: \(25x = 75\), so \(x = 3\) L.
  5. Check: total volume = 5 + 3 = 8 L, solute = 40% × 5 L = 2 L, and \(\frac{2}{8} = 25\%\). In the calculator (V1 = 5, c1 = 40, V2 = 3, c2 = 0) the final concentration is 25%.

Example 2: How much of Solution 1 is needed?

You have 6 L of a 60% solution (Solution 2). How much 15% solution (Solution 1) must be added to reach 45%?

  1. Start from \(c_1 x + c_2 V_2 = c_f (x + V_2)\), where x is the volume of Solution 1.
  2. Rearrange to get \(x = \frac{V_2 (c_2 - c_f)}{c_f - c_1}\).
  3. Substitute: \(x = \frac{6 (60 - 45)}{45 - 15} = \frac{6 \cdot 15}{30} = 3\) L.
  4. Check by substituting back: \(C_f = \frac{15 \cdot 3 + 60 \cdot 6}{3 + 6} = \frac{45 + 360}{9} = \frac{405}{9} = 45\%\). The calculator (V1 = 3, c1 = 15, V2 = 6, c2 = 60) gives 45%.

The target cf must lie strictly between c1 and c2. Otherwise the denominator or sign makes the answer impossible.

Advertisement

Key Terms and Variables

  • Solute: the substance that is dissolved, such as salt, sugar, alcohol or acid.
  • Solvent: the substance that does the dissolving, often water.
  • Solution: the uniform mixture of solute and solvent.
  • Concentration: the amount of solute per amount of solution, often given as percent by volume (mL solute per 100 mL solution) or percent by mass (g solute per 100 g solution). Use the same basis for every solution you blend.
  • Weighted average: an average in which each value counts in proportion to its weight. Here each concentration is weighted by its volume.
  • Alligation: a shortcut method for mixtures. The ratio of the volumes needed equals the ratio of the differences between the target and each concentration.
  • Dilution: lowering a concentration by adding solvent, which is a mixture where one solution has c = 0%.
  • c1, c2: the concentrations of Solution 1 and Solution 2.
  • cf: the final concentration of the blend.
  • V1, V2: the volumes of Solution 1 and Solution 2. The total volume is V1 + V2.

Assumption: the calculator adds volumes directly. Real liquids, such as alcohol and water, can show a slight volume contraction when mixed, so the measured total volume and concentration may differ a little from the calculated values. Mixing by mass avoids this issue.

FAQ

Do the volumes have to be in the same unit? Yes — both volumes must share the same unit so the weighted average is valid.

Can I mix water (0%) with a stock solution? Absolutely. Set one concentration to 0% to model diluting with pure solvent.

What if both volumes are zero? The calculator guards against division by zero and returns a final concentration of 0.

Sources & References

Last updated:

Most popular in Math and Statistics

View all Math and Statistics calculators