What is the Mixture Problem Calculator?
This calculator solves classic mixture (or "alligation") problems where two solutions of different concentrations are blended together. Given the volume and concentration of each solution, it computes the concentration of the resulting mixture, the total volume, and the total amount of pure solute. It is useful for chemistry labs, pharmacology dosing, agriculture spray mixing, cooking, and any situation where you combine liquids of differing strengths.
How to use it
Enter the volume of Solution 1 and its concentration as a percentage, then do the same for Solution 2. The units of volume can be anything (mL, L, gallons) as long as both volumes use the same unit. Concentrations are entered as percentages. Click calculate to see the blended concentration.
The formula explained
The amount of pure solute is conserved when mixing. The solute from each solution is its concentration times its volume. Adding the two and dividing by the total volume gives the final concentration:
$$c_f = \frac{c_1 \cdot V_1 + c_2 \cdot V_2}{V_1 + V_2}$$
If instead you know a target final concentration and want to find how much of Solution 1 to add, rearrange to \(x = \frac{V_2(c_2 - c_f)}{c_f - c_1}\).
Worked example
Mix 100 mL of a 10% solution with 300 mL of a 50% solution. Pure solute = \((10\times100 + 50\times300)/100 = (1000 + 15000)/100 = 160\) units. Total volume = 400 mL. Final concentration = $$\frac{10 \cdot 100 + 50 \cdot 300}{400} = \frac{16000}{400} = 40\%.$$ So the blend is 40% concentration with 160 units of pure solute.
Blending Scenarios Compared
Each row uses the weighted-average formula \(C_f = \frac{c_1 V_1 + c_2 V_2}{V_1 + V_2}\). Concentrations are percent by volume and volumes are in mL, so the solute is in mL of pure solute. Simple volume addition is assumed. In every row the final concentration lies between c1 and c2.
| Scenario | V1 (mL) | c1 (%) | V2 (mL) | c2 (%) | Total volume (mL) | Total solute (mL) | Final concentration (%) |
|---|---|---|---|---|---|---|---|
| Equal volumes of 10% and 50% | 100 | 10 | 100 | 50 | 200 | 10 + 50 = 60 | 30 |
| 1:3 ratio of 10% to 50% | 1000 | 10 | 3000 | 50 | 4000 | 100 + 1500 = 1600 | 40 |
| 20% stock diluted with equal water | 500 | 20 | 500 | 0 | 1000 | 100 + 0 = 100 | 10 |
| One volume much larger | 900 | 10 | 100 | 50 | 1000 | 90 + 50 = 140 | 14 |
| Unequal volumes of 12% and 32% | 2000 | 12 | 3000 | 32 | 5000 | 240 + 960 = 1200 | 24 |
Notice two patterns. The result sits closer to the concentration of the solution you use more of. In the 900 mL / 100 mL case, the 10% solution dominates, so the result (14%) is near 10% rather than the midpoint of 30%.
More Worked Examples
Example 1: Diluting a stock solution with pure water
How much pure water (0%) must be added to 5 L of a 40% solution to get a 25% solution?
- Let x be the litres of water. Water has c2 = 0, so it adds volume but no solute.
- Set up the weighted average: \(25 = \frac{40 \cdot 5 + 0 \cdot x}{5 + x}\).
- Multiply both sides by (5 + x): \(25(5 + x) = 200\), so \(125 + 25x = 200\).
- Solve: \(25x = 75\), so \(x = 3\) L.
- Check: total volume = 5 + 3 = 8 L, solute = 40% × 5 L = 2 L, and \(\frac{2}{8} = 25\%\). In the calculator (V1 = 5, c1 = 40, V2 = 3, c2 = 0) the final concentration is 25%.
Example 2: How much of Solution 1 is needed?
You have 6 L of a 60% solution (Solution 2). How much 15% solution (Solution 1) must be added to reach 45%?
- Start from \(c_1 x + c_2 V_2 = c_f (x + V_2)\), where x is the volume of Solution 1.
- Rearrange to get \(x = \frac{V_2 (c_2 - c_f)}{c_f - c_1}\).
- Substitute: \(x = \frac{6 (60 - 45)}{45 - 15} = \frac{6 \cdot 15}{30} = 3\) L.
- Check by substituting back: \(C_f = \frac{15 \cdot 3 + 60 \cdot 6}{3 + 6} = \frac{45 + 360}{9} = \frac{405}{9} = 45\%\). The calculator (V1 = 3, c1 = 15, V2 = 6, c2 = 60) gives 45%.
The target cf must lie strictly between c1 and c2. Otherwise the denominator or sign makes the answer impossible.
Key Terms and Variables
- Solute: the substance that is dissolved, such as salt, sugar, alcohol or acid.
- Solvent: the substance that does the dissolving, often water.
- Solution: the uniform mixture of solute and solvent.
- Concentration: the amount of solute per amount of solution, often given as percent by volume (mL solute per 100 mL solution) or percent by mass (g solute per 100 g solution). Use the same basis for every solution you blend.
- Weighted average: an average in which each value counts in proportion to its weight. Here each concentration is weighted by its volume.
- Alligation: a shortcut method for mixtures. The ratio of the volumes needed equals the ratio of the differences between the target and each concentration.
- Dilution: lowering a concentration by adding solvent, which is a mixture where one solution has c = 0%.
- c1, c2: the concentrations of Solution 1 and Solution 2.
- cf: the final concentration of the blend.
- V1, V2: the volumes of Solution 1 and Solution 2. The total volume is V1 + V2.
Assumption: the calculator adds volumes directly. Real liquids, such as alcohol and water, can show a slight volume contraction when mixed, so the measured total volume and concentration may differ a little from the calculated values. Mixing by mass avoids this issue.
FAQ
Do the volumes have to be in the same unit? Yes — both volumes must share the same unit so the weighted average is valid.
Can I mix water (0%) with a stock solution? Absolutely. Set one concentration to 0% to model diluting with pure solvent.
What if both volumes are zero? The calculator guards against division by zero and returns a final concentration of 0.