What Is the Segment Addition Postulate?
The segment addition postulate is a foundational rule in geometry. It states that if a point B lies on the line segment between two endpoints A and C, then the length of the whole segment equals the sum of its two parts: \(\text{AC} = \text{AB} + \text{BC}\). This calculator lets you enter any two of the three values and instantly solves for the missing one.
How to Use This Calculator
Fill in any two of the three fields — AB, BC, or AC — and leave the unknown one blank. The calculator detects which value is missing and applies the postulate to solve for it. If you fill in all three, it recomputes AC from AB + BC so you can check whether your point B is truly between A and C.
The Formula Explained
The postulate gives one equation with three quantities. Knowing any two determines the third:
- Find the whole: \(\text{AC} = \text{AB} + \text{BC}\)
- Find a part: \(\text{BC} = \text{AC} - \text{AB}\) or \(\text{AB} = \text{AC} - \text{BC}\)
Because subtraction is used to find a part, the whole (AC) must always be at least as large as either part for the configuration to be geometrically valid.
Worked Example
Suppose AB = 12 and BC = 8, and B is between A and C. Then $$\text{AC} = \text{AB} + \text{BC} = 12 + 8 = 20.$$ Conversely, if AC = 20 and AB = 12, then $$\text{BC} = 20 - 12 = 8.$$
More Worked Examples
In each example, AB, BC and AC are lengths of segments, and point B lies on segment AC between A and C. The postulate states \(AC = AB + BC\).
Example 1: Algebraic expressions
Suppose \(AB = 2x + 3\), \(BC = x + 5\) and \(AC = 20\). Find x, AB and BC.
- Apply the postulate: \(2x + 3 + x + 5 = 20\).
- Combine like terms: \(3x + 8 = 20\).
- Subtract 8 from both sides: \(3x = 12\).
- Divide by 3: \(x = 4\).
- Substitute back: \(AB = 2(4) + 3 = 11\) and \(BC = 4 + 5 = 9\).
- Check: \(11 + 9 = 20\), which matches AC. ✓ The calculator confirms this sum: 20.
Example 2: Decimal lengths
Suppose \(AB = 7.5\) cm and \(AC = 12.2\) cm. Find BC.
- Rearrange the postulate: \(BC = AC - AB\).
- Substitute: \(BC = 12.2 - 7.5\).
- Subtract: \(BC = \) 4.7 cm.
Keep the same unit for every length; do not mix cm and mm without converting first.
Example 3: Several interior points (chain)
Points A, B, C and D are collinear in that order, with \(AB = 3\), \(BC = 4\) and \(CD = 5\). Find AD.
- Treat A to C first: \(AC = AB + BC = 3 + 4 = 7\).
- Apply the postulate again with C between A and D: \(AD = AC + CD = 7 + 5 = 12\).
- Combined: \(AD = AB + BC + CD = 3 + 4 + 5 = 12\).
The postulate therefore extends to any number of interior points, as long as they are collinear and in order.
Key Terms and Definitions
- Point: an exact location in space. It has no size, length or width, and is usually named with a capital letter such as A.
- Line segment: the part of a line between two endpoints, including both endpoints. It has a measurable length.
- Endpoint: a point that marks one end of a segment. Segment AC has endpoints A and C.
- Collinear points: points that all lie on the same straight line.
- Between (betweenness): point B is between A and C when A, B and C are collinear and B lies on segment AC. Only then does \(AC = AB + BC\) hold.
- Congruent segments: segments with equal lengths. If \(AB = CD\), then segment AB is congruent to segment CD.
- Midpoint: the point on a segment that divides it into two congruent segments. If M is the midpoint of AC, then \(AM = MC = \tfrac{1}{2}AC\).
- Postulate vs. theorem: a postulate (or axiom) is a statement accepted as true without proof. A theorem is a statement that has been proven from postulates and earlier theorems. The Segment Addition Postulate is accepted as a basic property of measuring distances along a line.
Notation note: in this calculator, AB, BC and AC stand for the lengths of the segments, which are numbers. B must be collinear with A and C and lie between them. If B is off the line, the triangle inequality applies instead and \(AB + BC\) will be greater than AC.
FAQ
Does B have to be between A and C? Yes. The postulate only applies when B is a point on segment AC. If B is outside, the relationship does not hold.
What if I get a negative result? A negative part means your total (AC) is smaller than one of the parts, which is impossible for a point between the endpoints — recheck your inputs.
Can I use any unit? Yes. The postulate is unit-independent; just keep all three lengths in the same unit (cm, in, etc.).