What Is Solution Density?
Density is a measure of how much mass is packed into a given volume. For a solution—a homogeneous mixture such as salt water or a sugar syrup—the density is found by dividing the total mass of the solution (solvent plus dissolved solute) by the total volume the solution occupies. It is one of the most fundamental physical properties used in chemistry, biology, and engineering.
How to Use This Calculator
Enter the total mass of your solution in grams and the total volume in milliliters. The calculator instantly returns the density in g/mL (which equals g/cm³) and also converts it to kg/m³ for SI applications. Make sure both measurements describe the same sample.
The Formula Explained
The density formula is \(\rho = \frac{m}{V}\), where \(\rho\) (rho) is density, \(m\) is mass, and \(V\) is volume. When mass is in grams and volume in milliliters, density comes out in g/mL. Because 1 mL = 1 cm³ and 1 g/mL = 1000 kg/m³, the same number can be expressed in SI units by multiplying by 1000.
$$\rho = \frac{\text{Total Mass (g)}}{\text{Total Volume (mL)}}$$
Worked Example
Suppose you prepare a saltwater solution with a total mass of 110 g that fills 100 mL. The density is \(110 \div 100 = 1.1\) g/mL, equivalent to 1100 kg/m³. This is denser than pure water (1.0 g/mL), confirming that dissolving salt increases the density.
$$\rho = \frac{110 \text{ g}}{100 \text{ mL}} = 1.1 \text{ g/mL}$$Typical Densities of Common Solutions
The table lists approximate densities at about 20 °C. Percentages for NaCl and sucrose are by mass (w/w) in water, ethanol is by volume (v/v), and the HCl is 1 mol/L. Actual values depend on temperature and exact concentration, so treat these as reference points rather than exact figures.
| Solution | Density (g/mL) | Density (kg/m³) |
|---|---|---|
| Pure water | 0.998 | 998 |
| 5% NaCl | ~1.034 | ~1034 |
| 10% NaCl | ~1.071 | ~1071 |
| 20% NaCl | ~1.148 | ~1148 |
| 10% sucrose | ~1.038 | ~1038 |
| 20% sucrose | ~1.081 | ~1081 |
| 40% sucrose | ~1.176 | ~1176 |
| Ethanol 40% v/v in water | ~0.948 | ~948 |
| 1 M HCl | ~1.016 | ~1016 |
| Concentrated H₂SO₄ (98%) | ~1.84 | ~1840 |
Densities change with temperature, and most liquids become slightly less dense as they warm. Always compare values measured at the same temperature.
Density Unit Conversions
The calculator reports g/mL and kg/m³. Other common units convert as follows:
| Unit | Equivalent of 1 g/mL |
|---|---|
| g/cm³ | 1 (identical) |
| kg/L | 1 (identical) |
| kg/m³ | 1000 |
| g/L | 1000 |
| mg/mL | 1000 |
| lb/ft³ | ≈ 62.428 |
| lb/gal (US) | ≈ 8.345 |
Sample values
| g/mL (= g/cm³ = kg/L) | kg/m³ (= g/L) | lb/ft³ | lb/gal (US) |
|---|---|---|---|
| 1.0 | 1000 | 62.43 | 8.345 |
| 1.1 | 1100 | 68.67 | 9.180 |
| 1.25 | 1250 | 78.04 | 10.431 |
To convert from g/mL to kg/m³, multiply by 1000. To convert to lb/ft³, multiply by 62.428.
Interpreting Your Density Result
The calculator uses \(\rho = \frac{m}{V}\), where \(m\) is the total mass of the solution and \(V\) is its total volume. For example, a solution with a mass of 25.0 g and a volume of 20.0 mL has \(\rho = \frac{25.0\,\text{g}}{20.0\,\text{mL}}\), which is 1.25 g/mL, or 1250 kg/m³.
Compare with water
- Above about 1 g/mL (water is ~0.998 g/mL at 20 °C): the solution is denser than water. Salt, sugar and acid solutions are typical examples.
- Below about 1 g/mL: the solution is less dense than water. Ethanol-water mixtures are a common case, since ethanol itself is only about 0.79 g/mL.
What affects the result
- Concentration: density generally rises as more solute is dissolved. A measured density can estimate concentration by reading it against a calibration curve built from standards of known concentration.
- Temperature: density generally falls as temperature rises. Record the temperature and compare results only at the same one.
- Non-additive volumes: the volume of a mixture is often not the sum of the component volumes. Ethanol and water, for example, contract when mixed. Measure the mass and volume of the final solution itself rather than adding up the ingredients' volumes.
- Measurement precision: the result is only as good as the balance and the glassware. A volumetric flask or pycnometer gives much better results than a beaker, and the density cannot have more significant figures than the least precise measurement.
FAQ
Is g/mL the same as g/cm³? Yes. One milliliter equals exactly one cubic centimeter, so the values are identical.
Why is solution density usually greater than water? Dissolving a solute adds mass while changing volume only slightly, so most solutions are denser than the pure solvent.
Can I use kilograms and liters? Yes—kg/L gives the same numerical value as g/mL, so you can enter consistent units as long as mass and volume match.