What Is the Section Modulus?
The elastic section modulus (S) is a geometric property of a cross-section that measures its resistance to bending. For a solid rectangular beam of width b and height h, the section modulus about the centroidal axis is \(S = b \cdot h^{2} / 6\). A larger section modulus means a stiffer, stronger beam in bending. This is a universal geometry/mechanics tool — the result is expressed in cubic length units (e.g. mm³, cm³, in³) depending on the units you enter.
How to Use This Calculator
Enter the width b (the dimension parallel to the neutral axis) and the height h (the dimension in the direction of bending, measured perpendicular to the axis). The calculator returns the section modulus S, the moment of inertia \(I = b \cdot h^{3} / 12\), and the cross-sectional area. Keep your units consistent: if you enter millimetres, S comes out in mm³ and I in mm⁴.
The Formula Explained
Bending stress relates to the section modulus by \(\sigma = M / S\), where M is the applied bending moment. Section modulus is derived from the moment of inertia divided by the distance to the extreme fibre: \(S = I / c\). For a rectangle, \(I = b \cdot h^{3} / 12\) and \(c = h/2\), so $$S = \frac{b \cdot h^{3} / 12}{h/2} = \frac{b \cdot h^{2}}{6}.$$ Because height appears squared, increasing the depth of a beam is far more effective at boosting strength than increasing its width.
Worked Example
For a beam with \(b = 50\) mm and \(h = 100\) mm: $$S = \frac{50 \times 100^{2}}{6} = \frac{500000}{6} \approx 83{,}333.33 \text{ mm}^{3}.$$ The moment of inertia is $$I = \frac{50 \times 100^{3}}{12} = \frac{50{,}000{,}000}{12} \approx 4{,}166{,}666.67 \text{ mm}^{4}.$$
Interpreting the Section Modulus Result
The elastic section modulus \(S\) links a bending moment to the peak bending stress in the cross-section. For a rectangle, \(S = \frac{b\,h^2}{6}\), where \(h\) is the depth measured in the direction of bending. The bending stress at the extreme fibre is
$$\sigma = \frac{M}{S}$$
Rearranged, the moment at which the extreme fibre reaches a chosen stress limit is
$$M = \sigma_{\text{allow}} \cdot S$$
Short example: a rectangle with \(b = 50\) mm and \(h = 100\) mm has \(S = \frac{50 \cdot 100^2}{6} \approx\) 83,333 mm³. With \(\sigma_{\text{allow}} = 10\) MPa (10 N/mm²), \(M = 10 \cdot 83{,}333 = 833{,}333\) N·mm \(\approx 0.83\) kN·m.
- S vs. I: \(S\) governs bending strength (stress). The moment of inertia \(I = \frac{b\,h^3}{12}\) governs stiffness and deflection. For this section \(I = \frac{50 \cdot 100^3}{12} \approx 4{,}166{,}667\) mm⁴. The two are related by \(S = I / c\), where \(c = h/2\).
- Extreme fibre: \(S\) gives the stress at the top and bottom faces, the farthest points from the neutral axis. Stress is lower closer to the axis and zero at it.
- Scope: the result applies to elastic bending of a solid, homogeneous rectangle about its centroidal axis. It does not include shear stress, lateral-torsional or local buckling, stress concentrations, or safety factors.
Treat the number as a geometric property of the section, not as a verified capacity of a real member.
Unit Conversions for Section Modulus
Section modulus has units of length cubed. Moment of inertia has units of length to the fourth power.
| Quantity | Conversion |
|---|---|
| Section modulus S | 1 cm³ = 1,000 mm³ |
| Section modulus S | 1 m³ = 109 mm³ |
| Section modulus S | 1 in³ = 16,387.064 mm³ = 16.387 cm³ |
| Section modulus S | 1 mm³ = 6.1024×10−5 in³ |
| Moment of inertia I | 1 cm⁴ = 104 mm⁴ |
| Moment of inertia I | 1 in⁴ = 416,231.4 mm⁴ |
| Moment of inertia I | 1 m⁴ = 1012 mm⁴ |
Note: apply the cubic factor for \(S\) and the fourth-power factor for \(I\), not the linear factor. For example, 1 cm = 10 mm, but 1 cm³ = 10³ = 1,000 mm³ and 1 cm⁴ = 10⁴ mm⁴.
Example: \(83{,}333\) mm³ \(= 83.333\) cm³ \(= \frac{83{,}333}{16{,}387.064} \approx 5.085\) in³.
FAQ
Which dimension is the height? The height h is the dimension parallel to the direction of the applied bending (the depth of the beam). Swapping b and h gives the section modulus for bending about the other axis.
Does this work for any unit? Yes — it is pure geometry. Just keep b and h in the same length unit; results scale accordingly (length³ for S, length⁴ for I).
What is the difference between elastic and plastic section modulus? This tool computes the elastic section modulus used in elastic bending. The plastic section modulus (\(Z = b \cdot h^{2} / 4\)) applies when the entire section yields.