What Is the Sodium to Salt Calculator?
Nutrition labels around the world list either sodium or salt, and the two are not the same thing. Salt (sodium chloride, NaCl) is only about 40% sodium by weight. This calculator converts a sodium figure in milligrams into the equivalent amount of table salt in grams, so you can compare products and track your intake on a consistent basis.
How to Use It
Enter the sodium content shown on a food label or recipe in milligrams (mg). The calculator instantly returns the equivalent salt in grams. For example, a label reading 400 mg sodium per serving converts to 1 gram of salt.
The Formula Explained
Because sodium makes up roughly 40% of salt's weight, you divide by 0.4 — which is the same as multiplying by 2.5:
$$\text{Salt (g)} = \frac{\text{Sodium (mg)} \times 2.5}{1000}$$
The \(\times 2.5\) step converts sodium to salt in the same unit (mg → mg), and dividing by 1000 converts milligrams to grams.
Worked Example
Suppose a ready meal contains 1,000 mg of sodium. $$\text{Salt} = \frac{1000 \times 2.5}{1000} = 2.5 \text{ g of salt}$$ That is already a large share of the commonly recommended daily limit of around 5–6 g of salt.
Constants Used in the Conversion
The factor 2.5 is not arbitrary — it comes from the ratio of the molar mass of sodium chloride to the atomic mass of sodium. Every value below is a fixed physical or definitional constant, so the conversion never changes with the food, the brand or the country.
| Constant | Value | Note |
|---|---|---|
| Atomic mass of sodium (Na) | 22.99 g/mol | Standard atomic weight, rounded to 4 significant figures |
| Atomic mass of chlorine (Cl) | 35.45 g/mol | Standard atomic weight, rounded to 4 significant figures |
| Molar mass of sodium chloride (NaCl) | 58.44 g/mol | 22.99 + 35.45 |
| Sodium fraction of pure salt | 39.34% (w/w) | 22.99 ÷ 58.44 — salt is a little under two-fifths sodium by mass |
| Salt-to-sodium factor (sodium → salt) | 2.542 | 58.44 ÷ 22.99; rounded to 2.5 for nutrition labelling |
| Inverse factor (salt → sodium) | 0.393 | Reciprocal of 2.542; rounded to 0.4 in everyday use |
| Milligrams per gram | 1 g = 1,000 mg | SI prefix definition; converts label milligrams to grams |
Written out, the exact chemistry gives
$$\text{Salt (g)} = \frac{\text{Sodium (g)} \times 58.44}{22.99} = \text{Sodium (g)} \times 2.542$$and the labelling form used by this calculator applies the rounded factor together with the milligram-to-gram step:
$$\text{Salt (g)} = \frac{\text{Sodium (mg)} \times 2.5}{1000}$$Why 2.5 and not 2.542
The rounded factor is written into law rather than being a shortcut. In the European Union, Regulation (EU) No 1169/2011 on food information to consumers defines the declared salt value as salt equivalent = sodium × 2.5 exactly, and UK labelling rules retained the same definition. Manufacturers and this calculator therefore use 2.5 so that the result matches what appears on a pack.
The difference is small but real — about 1.7% low. For 1,000 mg of sodium the labelling factor gives 2.5 g of salt, while the exact molar ratio gives 1,000 × 2.542 ÷ 1000 = 2.542 g. At typical single-serving amounts the gap is a few hundredths of a gram, far below the rounding already present on labels, so for diet tracking either factor leads to the same decision.
FAQ
Why multiply by 2.5? One molecule of NaCl contains one sodium atom (23 g/mol) and one chlorine atom (35.5 g/mol), totalling 58.5 g/mol. Sodium is \(23/58.5 \approx 39.3\%\) of salt, so salt = sodium ÷ 0.393 ≈ sodium × 2.5.
How do I go the other way? To convert salt to sodium, divide the salt amount by 2.5 (or multiply by 0.4).
How much salt is too much? Many health authorities suggest adults keep salt under about 5–6 g (roughly 2,000–2,400 mg sodium) per day, but check local guidance.