Inductors in Parallel Calculator

Inductors in Parallel Calculator

Growing AI Skill PRO

Enter Calculation

Formula

1Ltotal=1L1+1L2+1L3+1L4\frac{1}{{{\text{L}_{\text{total}}}}} = \frac{1}{{{\text{L}_1}}} + \frac{1}{{{\text{L}_2}}} + \frac{1}{{{\text{L}_3}}} + \frac{1}{{{\text{L}_4}}}
Usage stats

Advertisement

Results

Total Parallel Inductance
5
henries (H)
Inductors combined 2

Report an error on this page

What Is the Inductors in Parallel Calculator?

When inductors are connected in parallel, the total (equivalent) inductance is always smaller than the smallest individual inductor — much like resistors in parallel. This calculator instantly computes the combined inductance of up to four inductors wired in parallel, assuming there is no mutual coupling between them.

Four inductors connected in parallel between two nodes
Inductors in parallel share the same two connection nodes.

How to Use It

Enter the value of each inductor in henries (H). Fill in L1 and L2 at minimum; L3 and L4 are optional — leave them blank or zero if you only have two inductors. Click calculate and the tool returns the equivalent inductance. To work in millihenries (mH) or microhenries (µH), keep your units consistent: the answer comes out in whatever unit you entered.

The Formula Explained

The governing equation is:

$$\frac{1}{\text{L}_{\text{total}}} = \frac{1}{\text{L}_1} + \frac{1}{\text{L}_2} + \dots + \frac{1}{\text{L}_n}$$

You add the reciprocals of every inductance, then take the reciprocal of that sum to get the total. For just two inductors this simplifies to the product-over-sum form \(\text{L}_{\text{total}} = \frac{\text{L}_1 \times \text{L}_2}{\text{L}_1 + \text{L}_2}\).

Advertisement
Reciprocal formula for total inductance in parallel
Total inductance is the reciprocal of the sum of reciprocals.

Worked Example

Suppose you have a 2 H and a 3 H inductor in parallel. Then $$\frac{1}{\text{L}_{\text{total}}} = \frac{1}{2} + \frac{1}{3} = 0.5 + 0.3333 = 0.8333.$$ Taking the reciprocal gives \(\text{L}_{\text{total}} = 1.2\ \text{H}\). Notice the result (1.2 H) is smaller than the smallest inductor (2 H), as expected.

Inductance Unit Conversion Table

Inductance is measured in henries (H) in the SI system. Smaller units are common in electronics. Before combining inductors in parallel, convert every value to the same unit, or enter all values in one unit.

From Henry (H) Millihenry (mH) Microhenry (µH) Nanohenry (nH)
1 H 1 1,000 1,000,000 1,000,000,000
1 mH (10-3 H) 0.001 1 1,000 1,000,000
1 µH (10-6 H) 0.000001 0.001 1 1,000
1 nH (10-9 H) 0.000000001 0.000001 0.001 1

Example conversions

  • 1 H = 1000 mH = 1,000,000 µH
  • 100 µH = 0.1 mH
  • 4.7 mH = 4,700 µH
  • 220 nH = 0.22 µH

Parallel Inductance Scenario Comparison

Each total uses \(\frac{1}{L_t} = \frac{1}{L_1} + \frac{1}{L_2} + \dots\), assuming no mutual coupling between the inductors.

Scenario Inductors Calculation Total
Two equal 10 mH, 10 mH \(\frac{10 \times 10}{10 + 10}\) 5 mH
Unequal pair 10 mH, 100 mH \(\frac{10 \times 100}{10 + 100} = \frac{1000}{110}\) ≈ 9.09 mH
Three equal 30 µH × 3 \(\frac{30}{3}\) 10 µH
Four equal 100 µH × 4 \(\frac{100}{4}\) 25 µH
Very small plus large 1 mH, 1 H (1000 mH) \(\frac{1 \times 1000}{1 + 1000} = \frac{1000}{1001}\) ≈ 0.999 mH

In the last row, the 1 H inductor barely changes the result. The total stays very close to the 1 mH inductor.

Advertisement

Interpreting Your Result

  • The total is always smaller than the smallest inductor. Every added parallel branch adds a term to the sum of reciprocals, which makes \(L_t\) smaller.
  • n equal inductors give L/n. Four 100 µH inductors give 100 / 4 = 25 µH.
  • The smallest inductor dominates. A large inductor in parallel with a small one changes the total only slightly (1 mH in parallel with 1 H is about 0.999 mH).
  • The formula assumes no mutual coupling. If the coils share magnetic flux (for example, they are wound close together or on the same core), the mutual inductance M changes the result. For two coupled coils in parallel, \(L_t = \frac{L_1 L_2 - M^2}{L_1 + L_2 \mp 2M}\), where the sign depends on whether the windings aid or oppose each other.
  • The math is the same as for resistors. Inductors in parallel combine like resistors in parallel, using the reciprocal sum.
  • Series and parallel swap roles. Inductors in series add directly (\(L_t = L_1 + L_2 + \dots\)), just as resistors in series do. Capacitors behave the opposite way: they add in parallel and combine by reciprocals in series.

FAQ

Why is parallel inductance smaller than each inductor? Adding parallel current paths provides more ways for current to flow, lowering the opposition to changing current and thus the effective inductance.

Does this account for mutual inductance? No. This calculator assumes the inductors are magnetically isolated (no coupling). Mutual inductance between coils would change the result.

Can I use different units? Yes, as long as all inductors use the same unit. Enter all values in mH (or µH) and the answer will be in mH (or µH).

Last updated:

Most popular in Physics and Engineering

View all Physics and Engineering calculators