Right Circular Cylinder Volume Calculator

Right Circular Cylinder Volume Calculator

Popular AI Skill PRO
Cylinder
Worked stepsStep 4 of 4

Volume V=πr2hV = \pi r^2 h

Download figure
Figure data
Radius3.3
Height12.2
Volume417.3857
Total area321.3849
Lateral area252.961
Base area34.2119
Cylinder in the Library: formulas and every calculator

Enter Calculation

Formula

V=π·Radius2·HeightV = \pi \cdot \text{Radius}^{2} \cdot \text{Height}
Usage stats

Advertisement

Results

Cylinder Volume
417.3857 cubic units
Measurement Value
Radius 3.3
Height 12.2
Surface Area 321.3849
Lateral Surface Area 252.961
Base Area 34.2119

Report an error on this page

What This Calculator Does

The Right Circular Cylinder Volume Calculator works out how much space a cylinder holds using just two measurements: its radius and its height. A "right circular cylinder" simply means a tube with circular ends where the side stands perpendicular (at 90°) to the base — think of a can, a pipe, or a water tank. Enter the two values and the tool instantly returns the volume, and it also computes the base area, lateral (side) surface area and total surface area in the same pass.

The Inputs You Provide

  • Radius (\(r\)): the distance from the centre of the circular base to its edge.
  • Height (\(h\)): the straight-line distance between the two circular ends.

Use the same unit for both fields. The volume comes out in those units cubed — if you enter centimetres, you get cubic centimetres (cm³); if you enter metres, you get cubic metres (m³).

The Formula Explained

The calculator applies the standard geometric formula:

$$V = \pi \times r^{2} \times h$$

The base of the cylinder is a circle with area \(\pi r^2\). Stacking that circular area through the full height \(h\) fills the cylinder, so multiplying the base area by the height gives the volume. Alongside this, the tool derives:

  • Base area = \(\pi r^2\)
  • Lateral surface area = \(2\pi r h\) (the curved side only)
  • Total surface area = \(2\pi r (r + h)\) (both ends plus the side)
Advertisement
Right circular cylinder showing radius r of the circular base and vertical height h
A right circular cylinder defined by its base radius r and height h.

Worked Example

Suppose a cylindrical tank has a radius of 3 m and a height of 5 m.

  • Volume = \(\pi \times 3^{2} \times 5 = \pi \times 9 \times 5 = 45\pi \approx\) 141.37 m³
  • Base area = \(\pi \times 3^{2} \approx 28.27\) m²
  • Lateral surface area = \(2\pi \times 3 \times 5 \approx 94.25\) m²
  • Total surface area = \(2\pi \times 3 \times (3 + 5) \approx 150.80\) m²

Volume Unit Conversions

The cylinder formula \(V = \pi r^2 h\) gives the volume in the cube of whatever length unit you enter. If the radius and height are in centimetres, the result is in cm³. If they are in feet, it is in ft³. Use the factors below to convert the result into the unit you need. Factors marked "exact" come from unit definitions. The others are rounded to six significant figures.

From To Factor Status
1 mL cm³ 1 cm³ Exact
1 L cm³ (mL) 1,000 cm³ Exact
1 m³ L 1,000 L Exact
1 m³ cm³ 1,000,000 cm³ Exact
1 in³ cm³ 16.387064 cm³ (≈ 16.3871) Exact
1 ft³ in³ 1,728 in³ Exact
1 ft³ L 28.316846592 L (≈ 28.3168) Exact
1 US gal in³ 231 in³ Exact
1 US gal L 3.785411784 L (≈ 3.78541) Exact
1 ft³ US gal ≈ 7.48052 US gal Rounded
1 imp gal (UK) L 4.54609 L Exact
1 L in³ ≈ 61.0237 in³ Rounded
1 L US gal ≈ 0.264172 US gal Rounded
1 L imp gal ≈ 0.219969 imp gal Rounded
1 m³ ft³ ≈ 35.3147 ft³ Rounded
1 m³ US gal ≈ 264.172 US gal Rounded

US vs. imperial gallons: the US gallon (231 in³, about 3.785 L) is used in the United States. The imperial gallon (4.54609 L) is the UK unit and is still used in some other Commonwealth countries. An imperial gallon is about 20% larger than a US gallon, so always check which one a figure uses.

Volume scales with the cube of length. Because 1 m = 100 cm, a cubic metre equals \(100^3\) cubic centimetres:

$$1\ \text{m}^3 = (100\ \text{cm})^3 = 1{,}000{,}000\ \text{cm}^3$$

Likewise, 1 ft = 12 in, so \(1\ \text{ft}^3 = 12^3 = 1{,}728\ \text{in}^3\). Convert the radius and height to the same unit before you calculate. Don't mix centimetres and metres, and don't convert a volume using a linear factor.

Advertisement

More Worked Examples

Example 1: A soda-can-sized cylinder (metric)

A can-shaped cylinder has a diameter of \(d = 6.6\) cm and a height of \(h = 12.2\) cm. This treats the can as a perfect cylinder, so real cans with tapered tops will hold slightly less.

  1. Halve the diameter to get the radius: \(r = \dfrac{d}{2} = \dfrac{6.6}{2} = 3.3\ \text{cm}\)
  2. Square the radius: \(r^2 = 3.3^2 = 10.89\ \text{cm}^2\)
  3. Find the base area \(\pi r^2\): \(\pi \times 10.89 \approx 34.21194\ \text{cm}^2\)
  4. Multiply by the height: \(V = 34.21194 \times 12.2 \approx 417.3857\ \text{cm}^3\)
  5. Round at the end and convert: since 1 cm³ = 1 mL exactly, \(V \approx 417.39\ \text{cm}^3 \approx 417.4\ \text{mL}\)
$$V = \pi (3.3)^2 (12.2) = \pi \times 10.89 \times 12.2 \approx 417.39\ \text{cm}^3$$

Result: 417.39 cm³, or about 417 mL. That is a little more than the 355 mL (12 US fl oz) a standard US can holds. The difference comes from the headspace and the narrowed top and bottom of a real can.

Example 2: A cylindrical tank (imperial / US units)

A cylindrical tank has a radius of \(r = 1.5\) ft and a height of \(h = 4\) ft. Find its capacity in cubic feet and in US gallons.

  1. Square the radius: \(r^2 = 1.5^2 = 2.25\ \text{ft}^2\)
  2. Find the base area \(\pi r^2\): \(\pi \times 2.25 \approx 7.068583\ \text{ft}^2\)
  3. Multiply by the height: \(V = 7.068583 \times 4 \approx 28.274334\ \text{ft}^3\)
  4. Convert to US gallons using \(1\ \text{ft}^3 = \tfrac{1728}{231} \approx 7.480519\ \text{US gal}\): \(28.274334 \times 7.480519 \approx 211.5067\ \text{US gal}\)
  5. Round at the end: \(V \approx 28.27\ \text{ft}^3 \approx 211.5\ \text{US gal}\)
$$V = \pi (1.5)^2 (4) = 9\pi \approx 28.27\ \text{ft}^3$$$$28.274334\ \text{ft}^3 \times 7.480519\ \tfrac{\text{US gal}}{\text{ft}^3} \approx 211.5\ \text{US gal}$$

Result: 28.27 ft³, or about 211.5 US gallons. In metric this is \(28.274334 \times 28.316847 \approx 800.6\ \text{L}\). In UK imperial gallons it is about 176.1 imp gal (\(800.64 \div 4.54609\)). Keep the unrounded intermediate values throughout, as shown above, so that rounding errors don't build up.

Frequently Asked Questions

What if I only know the diameter? Divide the diameter by two to get the radius, then enter that value. A 10 cm diameter means a 5 cm radius.

How do I find the capacity in litres? Calculate the volume in cubic centimetres, then divide by 1,000 — since 1 litre equals 1,000 cm³. The 141.37 m³ example above equals 141,370 litres.

Does this work for tilted or oblique cylinders? No. This formula assumes a right cylinder where the side is square to the base. For slanted cylinders the volume formula differs, though the base-area-times-perpendicular-height principle still applies.

Last updated:

Most popular in Geometry

View all Geometry calculators