Square Inches of a Circle Calculator

Square Inches of a Circle Calculator

Popular AI Skill PRO
Circle
CircleCircler = 5D = 10OPUWA = 78.54
Worked stepsStep 2 of 2

Area A=πr2A = \pi r^2, circumference C=2πr=πDC = 2\pi r = \pi D

Download figure
Figure data
Radius5
Area78.54
Diameter10
Circumference31.42
Circle in the Library: formulas and every calculator

Enter Calculation

Formula

Area=π×Radius (in)2\text{Area} = \pi \times \text{Radius (in)}^{2}
Usage stats

Advertisement

Results

Area of Circle
78.54
square inches (in²)
Radius 5 in
Diameter 10 in
Circumference 31.42 in

Report an error on this page

What This Calculator Does

This tool finds the area of a circle in square inches (in²). Enter either the radius or the diameter of your circle in inches, and the calculator instantly returns the enclosed area, along with the matching radius, diameter, and circumference for convenience. It's handy for flooring, fabric cutting, pipe cross-sections, baking pans, gardening beds, and any DIY or geometry task where you need the surface area of a round shape.

How to Use It

First choose whether you are measuring the radius (the distance from the center to the edge) or the diameter (the full width across the center). Then type the length in inches. The result appears immediately in square inches. If you measured in feet, multiply by 12 first to convert to inches.

The Formula Explained

The area of a circle is given by $$A = \pi r^{2}$$, where \(r\) is the radius and \(\pi \approx 3.14159\). If you only know the diameter \(d\), the radius is simply \(d \div 2\), so the formula becomes $$A = \frac{\pi d^{2}}{4}$$. Because the radius is squared, doubling the radius quadruples the area.

Advertisement
Circle showing radius r, diameter d, and shaded interior area
The area of a circle is found from its radius using \(A = \pi r^{2}\).

Worked Example

Suppose a round table has a radius of 5 inches. Plug it in: $$A = \pi \times 5^{2} = \pi \times 25 \approx 78.54 \text{ square inches}.$$ If instead you knew the diameter was 10 inches, the radius is \(10 \div 2 = 5\) inches, giving the same \(78.54 \text{ in}^{2}\).

Circle with labeled radius and the area formula A = πr²
Squaring the radius and multiplying by \(\pi\) gives the area in square inches.

Circle Area Quick Reference by Diameter (Inches)

Area is found with \(A = \pi r^2 = \dfrac{\pi d^2}{4}\) and circumference with \(C = \pi d\). Values are rounded to 2 decimals.

Diameter (in) Radius (in) Area (in²) Circumference (in)
1 0.5 0.79 3.14
2 1 3.14 6.28
3 1.5 7.07 9.42
4 2 12.57 12.57
6 3 28.27 18.85
8 4 50.27 25.13
9 4.5 63.62 28.27
10 5 78.54 31.42
12 6 113.10 37.70
14 7 153.94 43.98
16 8 201.06 50.27
18 9 254.47 56.55
24 12 452.39 75.40

Example: for a 10 in diameter, \(r = 5\), so \(A = \pi \times 5^2 = 25\pi \approx 78.54\) in².

Square Inch Conversions

1 square inch equals Factor
Square feet (ft²) 0.00694444 (÷ 144)
Square yards (yd²) 0.000771605 (÷ 1296)
Square centimeters (cm²) 6.4516 (exact)
Square millimeters (mm²) 645.16 (exact)
Square meters (m²) 0.00064516 (exact)

These factors follow from the definition 1 inch = 2.54 cm exactly, so 1 in² = 2.54² = 6.4516 cm².

Example: a circle of 78.54 in² is \(78.54 \div 144 \approx 0.5454\) ft², and \(78.54 \times 6.4516 \approx 506.7\) cm².

Advertisement

Practical Tips for Measuring and Ordering Material

  • Measure across the widest point. Measure the full diameter through the center, then halve it to get the radius. This is usually more accurate than trying to find the center and measure the radius directly.
  • Small errors grow. Because the radius is squared, a small measurement error is magnified in the area. For example, a 10 in diameter gives 78.54 in², but 10.2 in gives about 81.71 in², roughly 4% more.
  • Add waste allowance. Add roughly 10% extra for cutting waste, trimming, or pattern matching. Complex cuts or fragile materials may need more.
  • Round up when buying. Material is sold in whole units such as sheets, square feet, or yards, so round up to the next whole unit.
  • Use one unit throughout. Take all measurements in the same unit before converting. Convert the final area, not the individual steps, using the exact factors above.

Note: pi-based results are rounded, so keep extra decimals during intermediate steps and round only at the end.

FAQ

What if I measured the diameter, not the radius? Just select "Diameter" — the calculator halves it automatically before computing the area.

How do I convert to square feet? Divide the square-inch result by 144 (since \(1 \text{ ft}^{2} = 144 \text{ in}^{2}\)).

Does this work for any unit? The math is identical for any unit; just keep the input and output units consistent. This tool labels everything in inches.

Last updated:

Most popular in Geometry

View all Geometry calculators