Rectangle Height from Width and Aspect Ratio

Rectangle Height from Width and Aspect Ratio

Popular AI Skill PRO

Enter Calculation

Formula

Height=Width×Aspect Ratio HeightAspect Ratio Width\text{Height} = \text{Width} \times \frac{\text{Aspect Ratio Height}}{\text{Aspect Ratio Width}}

Example

Height=1920×916=1,080\text{Height} = 1920 \times \frac{9}{16} = 1{,}080
Usage stats

Advertisement

Results

Rectangle Height
1,080
same units as width
Area (width × height) 2,073,600

Report an error on this page

What this calculator does

This tool computes the height of a rectangle when you already know its width and the aspect ratio you want to keep. Aspect ratio describes the proportional relationship between width and height — for example 16:9 for widescreen video, 4:3 for classic displays, or 3:2 for many photographs. By locking width and ratio, the height is fully determined.

How to use it

Enter the width in whatever units you like (pixels, cm, inches). Then enter the two parts of the aspect ratio: the width part (left of the colon) and the height part (right of the colon). For a 16:9 frame, use 16 as the aspect-width and 9 as the aspect-height. The calculator returns the matching height and the total area.

The formula explained

The governing equation is:

$$\text{Height} = \text{Width} \times \frac{\text{Aspect Ratio Height}}{\text{Aspect Ratio Width}}$$

Because the rectangle keeps the same proportions, the ratio of height to width must equal the ratio of the aspect numbers. Rearranging gives the height directly. The area is simply \(\text{width} \times \text{height}\).

Advertisement
Rectangle with width w and height h labeled, showing aspect ratio components
Height is found by scaling the width by the ratio of aspect-ratio height to aspect-ratio width.

Worked example

Suppose you have a banner that is 1920 px wide and you want it in 16:9. Then $$h = 1920 \times \frac{9}{16} = 1920 \times 0.5625 = \mathbf{1080 \text{ px}}.$$ The area is \(1920 \times 1080 = 2{,}073{,}600\) square pixels.

Common Aspect Ratios and Their Height Multipliers

An aspect ratio written as W:H means that for every W units of width there are H units of height. The height multiplier is simply H ÷ W, so \(\text{Height} = \text{Width} \times \frac{H}{W}\). Multiply any width by the value in the table to get the height.

Aspect ratio (W:H) Height per 1 unit of width Typical uses
1:1 1.0000 Square social media posts, profile pictures, album art
5:4 0.8000 Some older 1280×1024 monitors, 8×10 in photo prints, portrait-style social posts (4:5 is the rotated version)
4:3 0.7500 Older standard-definition TV, many compact cameras, tablets
3:2 0.6667 35 mm film and many DSLR/mirrorless photos, 6×4 in prints
16:10 0.6250 Some laptop and desktop monitors (e.g. 1920×1200)
16:9 0.5625 HD/4K video, most TVs and monitors, YouTube
21:9 0.4286 (9 ÷ 21 = 0.428571…) Ultrawide monitors and cinematic-style video; actual products are often slightly different, such as 64:27 or 43:18, and are marketed as 21:9
9:16 1.7778 Vertical video such as phone stories and short-form clips
2:1 0.5000 Banner images, some wide web headers, some phone screens

Multipliers are rounded to four decimals. For exact results, use the fraction H/W rather than the rounded decimal.

Advertisement

Height Comparison for a Fixed Width Across Ratios

The table below keeps the width fixed at 1920 px and shows how the height changes with the aspect ratio, using \(\text{Height} = 1920 \times \frac{H}{W}\).

Aspect ratio Calculation Height (px)
1:1 1920 × 1/1 1920
4:3 1920 × 3/4 1440
3:2 1920 × 2/3 1280
16:10 1920 × 10/16 1200
16:9 1920 × 9/16 1080
21:9 1920 × 9/21 = 17280 ÷ 21 = 822.857… ≈ 823

Rounding note: only 21:9 gives a non-integer height at this width. Pixel dimensions must be whole numbers, so 822.857 is rounded to 823 px (or 822 px if you want an even number for video encoding). Rounding slightly changes the true ratio, so for exact proportions choose a width that divides evenly, for example a width that is a multiple of 21 for 21:9. The same method works for any unit, such as 1000 mm wide at 4:3, which gives 1000 × 3/4 = 750 mm.

FAQ

Can I use any units? Yes — the height comes out in the same unit you entered for width, since ratios are unitless.

What if I know the height and want the width? Swap the values: \(w = h \times \frac{\text{ar}_w}{\text{ar}_h}\).

What does an aspect-width of zero do? Division by zero is undefined, so the calculator returns 0 to avoid an error — enter a positive aspect-width.

Last updated:

Most popular in Geometry

View all Geometry calculators