327 calculators

  • CSPF Air Conditioner Electricity Cost Calculator
    Estimate your air conditioner's electricity cost from its CSPF efficiency rating, cooling capacity, running hours, and power tariff in seconds.
  • Solar Inverter and Battery Sizing Calculator
    Size your solar inverter capacity and battery bank fast. Enter load wattage, surge factor, backup hours, battery voltage and depth of discharge to get instant results.
  • Three-Phase Current Calculator
    Calculate three-phase line current in amps from power, line voltage and power factor using I = P / (√3 Ɨ V Ɨ PF). Free and instant.
  • Solar String Sizing Calculator
    Calculate how many PV modules per string keep array voltage inside your inverter operating window across cold and hot temperature extremes.
  • Thevenin Equivalent Calculator
    Compute the Thevenin equivalent of a circuit. Enter open-circuit voltage and short-circuit current to find Thevenin voltage Vth and resistance Rth.
  • Battery State of Charge Calculator
    Estimate battery State of Charge (SOC %) from a measured voltage reading using linear interpolation between empty (Vmin) and full (Vmax) voltages.
  • Three-Phase Transformer Turns Ratio Calculator
    Calculate the turns ratio, secondary voltage and current of a three-phase transformer from winding turns, primary voltage and Wye/Delta connections.
  • Motor Torque from kW and RPM Calculator
    Calculate electric motor torque in newton-metres from power (kW) and speed (RPM) using T = 9549 x kW / RPM. Includes lb-ft conversion.
  • Impedance Calculator (Z from R and X)
    Calculate AC impedance Z from resistance R and reactance X using Z = √(R² + X²). Also returns the phase angle θ in degrees instantly.
  • Volts to Watts Calculator
    Convert volts to watts instantly. Enter voltage (V) and current (A) to calculate electrical power in watts using P = V Ɨ I.
  • Resistor Color Code Calculator
    Enter the 1st band, 2nd band, multiplier, and tolerance colors to decode a 4‑band resistor and get its resistance value in ohms with tolerance.
  • Inductors in Parallel Calculator
    Calculate total inductance of up to 4 inductors connected in parallel using 1/Lt = 1/L1 + 1/L2 + ... Fast, accurate, free online tool.
  • Inverting Buck-Boost Converter Calculator
    Calculate the negative output voltage of an inverting buck-boost converter from input voltage and duty cycle using Vout = āˆ’Vin Ɨ D/(1āˆ’D).
  • Watts to Lux Calculator
    Convert watts to lux using luminous efficacy and lit area. Enter power (W), efficacy (lm/W) and area (m²) to get illuminance in lux instantly.
  • Voltage Divider Calculator
    Calculate the output voltage of a resistive voltage divider from Vin, R1 and R2. Also finds loop current and total power dissipated.
  • Solenoid Inductance Calculator
    Calculate the inductance of an air-core solenoid from turns, cross-sectional area, and coil length using L = µ₀N²A/l. Free physics tool.
  • Power Unit Conversion Calculator
    Convert power between watt, kilowatt, milliwatt, metric & imperial horsepower, dBm, ft-lbf/s, cal/s, kcal/s and BTU/s instantly with exact factors.
  • Hydropower Output Calculator
    Calculate hydroelectric power output from water flow rate, head, and efficiency using P = ρgQHη. Results in watts and kilowatts.
  • kWh to kW Calculator
    Convert energy in kilowatt-hours (kWh) to power in kilowatts (kW) by dividing energy by time in hours. Fast, accurate kWh to kW conversion.
  • Pi Attenuator Calculator
    Calculate Pi attenuator resistor values (series R1 and two shunt R2) for any attenuation in dB and characteristic impedance. Free RF pad designer.
  • Resistor Wattage Calculator
    Calculate the power dissipated by a resistor using P = I²R = V²/R. Enter any two of voltage, current, or resistance to find watts and a safe rating.
  • Shockley Diode Equation Calculator
    Compute diode current using the Shockley diode equation I = Is(e^(V/nVt) āˆ’ 1). Enter saturation current, voltage, ideality factor, and temperature.
  • Wind Turbine Power Output Calculator
    Calculate the theoretical wind power available through a turbine rotor from diameter, air density and wind speed. Output in watts, kilowatts and metric horsepower.
  • Wire Resistance Calculator
    Calculate the electrical resistance of a wire from its resistivity, length, and cross-sectional area using R = ρL/A. Free online tool.