Diagonal of a Cube Calculator

Diagonal of a Cube Calculator

Popular AI Skill PRO

Enter Calculation

Formula

dspace=Edge Length (a)·3d_{space} = \text{Edge Length (a)} \cdot \sqrt{3}

Example

dspace=10·3≈17.3205d_{space} = 10 \cdot \sqrt{3} \approx 17.3205
Show calculation steps (1)
  1. Face Diagonal

    dface=Edge Length (a)·2d_{face} = \text{Edge Length (a)} \cdot \sqrt{2}

    Face diagonal of a cube from edge length a

Usage stats

Advertisement

Results

Space Diagonal
17.3205
corner-to-opposite-corner
Edge length (a) 10
Face diagonal 14.1421
Space diagonal 17.3205

Report an error on this page

What Is the Diagonal of a Cube?

A cube has two kinds of diagonals. The face diagonal runs corner to corner across a single square face, while the space diagonal (also called the body diagonal) passes through the interior of the cube, connecting two opposite corners. This calculator finds both from a single input: the edge length a.

Cube with edge, face diagonal, and space diagonal highlighted
A cube showing its edge a, the face diagonal, and the space diagonal connecting opposite corners.

How to Use This Calculator

Enter the edge length of your cube — the length of any one of its sides. The tool instantly returns the space diagonal as the main result and lists the face diagonal alongside it. Use any unit you like (cm, inches, metres); the diagonals come back in the same unit.

The Formula Explained

The face diagonal comes from the Pythagorean theorem applied to one square face: $$d = \sqrt{a^2 + a^2} = a\sqrt{2}$$ The space diagonal extends this into three dimensions by combining a face diagonal with the perpendicular edge: $$d = \sqrt{a^2 + a^2 + a^2} = a\sqrt{3}$$ So for any cube, the space diagonal is always \(\sqrt{3} \approx 1.732\) times the edge, and the face diagonal is \(\sqrt{2} \approx 1.414\) times the edge.

Advertisement
Two right triangles showing derivation of face and space diagonals
The face diagonal forms a right triangle with two edges (a√2); the space diagonal uses the face diagonal and the third edge (a√3).

Worked Example

Suppose a cube has an edge length of 5. The face diagonal is $$5 \times \sqrt{2} = 5 \times 1.41421 \approx 7.0711$$ The space diagonal is $$5 \times \sqrt{3} = 5 \times 1.73205 \approx 8.6603$$ Both share the same units as the original edge.

Cube Diagonals for Common Edge Lengths

The table lists the face diagonal \(a\sqrt{2}\) and the space diagonal \(a\sqrt{3}\) for several edge lengths \(a\). Results are rounded to 4 decimal places and are in the same unit as the edge (cm, m, in, and so on).

Edge length (a) Face diagonal (a√2) Space diagonal (a√3)
1 1.4142 1.7321
2 2.8284 3.4641
3 4.2426 5.1962
5 7.0711 8.6603
10 14.1421 17.3205
20 28.2843 34.6410

Note: the ratios are constant for every cube. The face diagonal is always about 1.4142 times the edge, and the space diagonal is always about 1.7321 times the edge. Doubling the edge doubles both diagonals.

Advertisement

Key Constants: √2 and √3

Constant Value Applies to
√2 ≈ 1.41421356 Face diagonal: the diagonal of one square face, \(d_{face}=a\sqrt{2}\)
√3 ≈ 1.73205081 Space diagonal: corner to opposite corner through the interior, \(d_{space}=a\sqrt{3}\)

Both come from the Pythagorean theorem. The face diagonal is \(\sqrt{a^2+a^2}=a\sqrt{2}\). The space diagonal is \(\sqrt{a^2+a^2+a^2}=a\sqrt{3}\).

Inverse factors: edge from a diagonal

  • From the face diagonal: \(a = d_{face}/\sqrt{2} \approx 0.70711 \cdot d_{face}\)
  • From the space diagonal: \(a = d_{space}/\sqrt{3} \approx 0.57735 \cdot d_{space}\)

Both √2 and √3 are irrational numbers. Their decimal expansions never end and never repeat, so every value in the table above is a rounded approximation.

FAQ

Which diagonal is longer? The space diagonal is always longer than the face diagonal, since \(\sqrt{3} > \sqrt{2}\).

Can I find the edge from a diagonal? Yes — divide a known space diagonal by \(\sqrt{3}\), or a face diagonal by \(\sqrt{2}\), to recover the edge length.

Does this work for any unit? Yes. The formulas are dimension-independent, so the output is in whatever unit you entered the edge.

Last updated:

Most popular in Geometry

View all Geometry calculators