What is the Square Area Calculator?
This calculator finds the area of a square using the simple formula \(A = s^{2}\), where s is the length of one side. Because all four sides of a square are equal, you only need a single measurement. Along with the area, the tool also returns the perimeter and the diagonal for convenience.
How to use it
Enter the side length of your square in any unit (cm, m, inches, feet — the result is in those same units squared). Click calculate and you instantly get the area in square units, the perimeter (the distance around the square), and the diagonal (the straight line corner to corner).
The formula explained
A square is a special rectangle whose length and width are identical. The area of any rectangle is length × width, so for a square it becomes \(s \times s = s^{2}\). The perimeter adds up all four equal sides:
$$P = 4s$$The diagonal forms a right triangle with two sides, so by the Pythagorean theorem
$$d = \sqrt{s^{2} + s^{2}} = s\sqrt{2}$$
Worked example
Suppose a square tile has a side of 5 cm. The area is
$$A = 5^{2} = 25 \text{ cm}^{2}$$The perimeter is
$$P = 4 \times 5 = 20 \text{ cm}$$and the diagonal is
$$d = 5\sqrt{2} \approx 7.07 \text{ cm}$$
Square Size Comparison: Side Length vs Area, Perimeter and Diagonal
For a square with side \(s\), the area is \(A = s^2\), the perimeter is \(P = 4s\), and the diagonal is \(d = s\sqrt{2}\approx 1.4142\,s\). The table uses one consistent length unit. Area is in square units, while perimeter and diagonal are in linear units. Diagonals are rounded to 2 decimals.
| Side (s) | Area (s²) | Perimeter (4s) | Diagonal (s√2) |
|---|---|---|---|
| 1 | 1 | 4 | 1.41 |
| 2 | 4 | 8 | 2.83 |
| 5 | 25 | 20 | 7.07 |
| 10 | 100 | 40 | 14.14 |
| 20 | 400 | 80 | 28.28 |
| 50 | 2500 | 200 | 70.71 |
Scaling note: area grows with the square of the side, while perimeter and diagonal grow in direct proportion. Doubling the side multiplies the area by \(2^2 = 4\) (side 5 gives 25, side 10 gives 100). Tripling the side multiplies the area by \(3^2 = 9\). The perimeter and diagonal only double or triple.
Square Unit Conversion Table
Area units are two-dimensional, so a linear conversion factor must be squared. Since 1 m = 100 cm, then 1 m² = 100² cm² = 10,000 cm². Likewise, 1 in = 2.54 cm gives 1 in² = 2.54² cm² = 6.4516 cm², and 1 ft = 12 in gives 1 ft² = 12² in² = 144 in².
| Unit | Equivalent area |
|---|---|
| 1 m² | 10,000 cm² = 1,550.0031 in² = 10.7639 ft² = 1.19599 yd² |
| 1 ft² | 144 in² = 0.092903 m² |
| 1 in² | 6.4516 cm² |
| 1 yd² | 9 ft² = 0.836127 m² |
| 1 km² | 1,000,000 m² |
| 1 hectare | 10,000 m² |
| 1 acre | 4,046.86 m² |
Example: a square with a 3 ft side has an area of \(3^2 = 9\) ft². This equals 1 yd² (because 1 yd = 3 ft, so 1 yd² = 9 ft²), or about 0.836 m². Convert the side length first and then square it, or square it first and then apply the squared factor. Both routes give the same result.
FAQ
What units does the result use? Whatever unit you enter the side in — the area comes out as that unit squared (e.g. metres → square metres).
Can I find the side from the area? Yes — take the square root of the area: \(s = \sqrt{A}\). For an area of 25, the side is \(\sqrt{25} = 5\).
Is a square's area the same as a rectangle's? Yes, a square is a rectangle with equal sides, so the area formula length × width simplifies to \(s^{2}\).