Circular Segment Area Calculator (from Radius and Height)

Circular Segment Area Calculator (from Radius and Height)

Popular AI Skill PRO

Enter Calculation

Formula

A=θ2r2−(r−h)h(2r−h)where{r=Radiush=Heightθ=2arccos⁡(1−hr)\begin{gathered} A = \frac{\theta}{2}\,r^{2} - (r - h)\sqrt{h\,(2r - h)} \\[1.5em] \text{where}\quad \left\{ \begin{aligned} r &= \text{Radius} \\ h &= \text{Height} \\ \theta &= 2\arccos\!\left(1 - \tfrac{h}{r}\right) \end{aligned} \right. \end{gathered}
Usage stats

Advertisement

Results

Area S
11.18238045
square units (unit²)
Central angle θ (rad) 1.854590436 rad
Central angle θ (degrees) 106.2602047083°
Arc length L 9.27295218 units
Chord length c 8 units

Report an error on this page

What is a circular segment?

A circular segment is the region of a circle "cut off" by a straight line (a chord) — the curved, arch-like area between the chord and the arc above it. The most natural way to describe such a segment is by the circle's radius r and the segment height h (also called the sagitta), which is the maximum distance from the chord up to the arc. This is pure geometry and works in any units; just keep r and h in the same length unit and the area comes out in that unit squared.

Circle with a chord cutting off a shaded segment, showing radius, segment height, and chord
A circular segment is the region (shaded) between a chord and the arc; r is the radius and h is the segment height (sagitta).

How to use this calculator

Enter the radius r and the segment height h. The height must satisfy \(0 < h \le 2r\): when \(h = r\) you have a semicircle, and when \(h = 2r\) the segment is the whole circle. Pick the number of significant digits you want shown (this only affects the display, not the math). The tool returns the segment area S, the central angle θ in both radians and degrees, the arc length L, and the chord length c.

The formulas explained

First the central angle is found from the height:

$$\theta = 2\cdot\arccos\!\left(1 - \frac{h}{r}\right).$$

The arc length is

$$L = r\cdot\theta,$$

and the chord is

$$c = 2\cdot\sqrt{h(2r - h)}.$$

The area combines a circular-sector term with a triangle correction:

$$S = \frac{\theta}{2}\cdot r^{2} - (r - h)\cdot\sqrt{h(2r - h)}.$$

When \(h > r\) the term \((r - h)\) becomes negative, which correctly adds area beyond the semicircle.

Advertisement
Circular segment diagram showing central angle theta, radius r, chord c and height h
Key quantities: central angle θ, radius r, chord length c, and height h used in the area formula.

Worked example

Take \(r = 1\) and \(h = 0.5\). Then \(1 - h/r = 0.5\), so

$$\theta = 2\cdot\arccos(0.5) = 2.0943951 \text{ rad} = 120^{\circ}.$$

The arc length

$$L = 1 \times 2.0943951 = 2.0943951.$$

With \(h(2r - h) = 0.75\), \(\sqrt{0.75} = 0.8660254\), so \(c = 1.7320508\). Finally

$$S = 1.0471976 - 0.5\cdot 0.8660254 = 0.6141848.$$
Advertisement

How to Calculate a Segment Area by Hand

  1. Check the inputs. Make sure \(0 < h \le 2r\). Use the same length unit for r and h. The area then comes out in that unit squared.
  2. Compute \(1 - h/r\). This is the cosine of half the central angle. It lies between −1 and 1 when the inputs are valid.
  3. Find θ. Take the arccos and double it: \(\theta = 2\arccos(1 - h/r)\). Keep θ in radians, because the formulas for arc length and area need radians. Multiply by 180/π only if you want degrees.
  4. Compute the half-chord. \(\sqrt{h(2r-h)}\).
  5. Arc length and chord. \(s = r\theta\) and \(c = 2\sqrt{h(2r-h)}\).
  6. Area. \(A = \tfrac{\theta}{2}r^2 - (r-h)\sqrt{h(2r-h)}\). The first term is the sector area. The second is the triangle formed by the two radii and the chord, which is subtracted. When h > r this term is negative, so subtracting it adds area.
  7. Sanity check. The result must be positive and less than \(\pi r^2\) (equal only when h = 2r). For h = r it should be exactly half the circle.

Example: r = 5, h = 2.

  1. \(0 < 2 \le 10\), so the inputs are valid.
  2. \(1 - 2/5 = 0.6\).
  3. \(\arccos(0.6) = 0.927295\), so \(\theta = 2(0.927295) = 1.854590\) rad (about 106.26°).
  4. \(\sqrt{2(10-2)} = \sqrt{16} = 4\).
  5. Arc length \(= 5 \times 1.854590 = 9.272951\). Chord \(= 2 \times 4 = 8\).
  6. \(A = \tfrac{1.854590}{2}(25) - (5-2)(4) = 23.182380 - 12 =\) 11.18238.
  7. Check: \(\pi r^2 = 78.539816\), and 11.18238 is smaller, about 14.2% of the circle.

FAQ

What is the sagitta? It is the segment height \(h\) — the perpendicular distance from the midpoint of the chord to the arc.

What if h equals 2r? The segment becomes the entire circle: \(\theta = 2\pi\), the chord length \(c = 0\), and \(S = \pi r^{2}\).

Can the area exceed a semicircle? Yes. When \(h > r\) the segment is bigger than half the circle, and the formula accounts for this automatically.

Last updated:

Most popular in Geometry

View all Geometry calculators